Installation / Operation Instruction Manual
Table Of Contents
- Brute MagnaTech
- Table of Contents. Page 1
- SECTION 1 General Information
- SECTION 2 Venting and Combustion Air
- SECTION 3 Gas supply and Piping
- SECTION 4 Water Flow and Headloss Data
- SECTION 5 Piping
- SECTION 6 Condensate Drain Trap
- SECTION 7 Electrical Connections
- SECTION 8 Control Operation
- 8.A The Home Screen
- 8.B Login to Lock / Unlock the Display Screen
- 8.C Quick Start
- 8.D Configuration
- 8.E Service Screens
- 8.F Messages and USB
- 8.G Active Demands
- SECTION 9 Parameter Tables
- SECTION 10 Initial startup Instructions
- SECTION 11 Maintenance
- SECTION 12 Troubleshooting
- SECTION 13 Replacement Parts
- 13.A General Information
- 13.B Component Illustrations, Parts Lists, and Part Numbers
- 13.B.1 Final Assembly, Part Numbers
- 13.B.2 Frame and Jacket Assembly, Part Numbers
- 13.B.3 Control Panel, Part Numbers
- 13.B.4 Air / Gas System, Part Numbers (Model 1600)
- 13.B.5 Air / Gas System, Part Numbers (Model 2000)
- 13.B.6 Air / Gas System, Part Numbers (Models 2500 & 3000)
- 13.B.7 Air / Gas System, Part Numbers(Models 3500 and 4000)
- 13.B.8 AC Distribution Box, Part Numbers (Model 1600)
- 13.B.9 AC Distribution Box, Part Numbers (Model 2000)
- 13.B.10 AC Distribution Box, Part Numbers (Models 2500 to 4000)
- 13.B.11 Inlet Waterway Assemblies, Part Numbers
- 13.B.12 Outlet Waterway Assemblies, Part Numbers
- 13.B.13 Gas Train Assembly, Part Numbers(Models 1600, 2000, 2500 and 3000)
- 13.B.14 Gas Train Assembly, Part Numbers (Models 3500 and 4000)
Page 60
8.B Login to Lock / Unlock the Display Screen
Password Protection:
To change conguration or parameters, a password is required. The control system includes three levels of
password protection. Touch the 'Current Lock Status' icon at the top of the screen.
1- USER password is lhs. This password is for ‘Safe’ access ‘Non-Critical’ adjustments and functions.
Use this password if you want to make adjustments without fear of altering the critical conguration of the
system. When unlocked in the User mode, the icon will change to
2- INSTALLER password is 17. This password is for the trained Installer / Technician for conguration
and parameter changes made during the initial setup and commissioning. Be aware that in this level of
password protection, changes to the conguration setup may result in lock-outs or conicts with your
system setup, resulting in technical issues.
When unlocked in the Installer mode, the icon will change to
3- OEM: Conguration and parameter changes available only to the factory. When unlocked in the OEM
mode, the icon willchange to
To Logout
Walk Away Result
Logout. If the Installer is done and wants to lock the display immediately, tap the Logout icon to exit Installer
or User Mode. Exiting the Installer or User Mode will lock the unit.
Walk-Away Result. The user can choose how long the control will remain unlocked after interaction with the
control has stopped. After this time (default is 5 minutes), the screen will lock itself.
See “8.E.4 Screen Settings Timeout” on page 95