User Manual

Page 14

RADFORD

HITE

H2374800-

Page 42

RADFORD

HITE

rated for 120Vac, 7.4 Amps. To use the contacts, power must

be supplied on one terminal with the other terminal wired to

the pump or a relay controlling the pump.

The DHW pump connections are located on terminal block

5 (TB5) in the control panel and are rated for 120Vac, 7.4

Amps. To use the contacts, power must be supplied on one

terminal, and the other terminal wired to the pump or a relay

controlling the pump.

Additional 120VAC circuits may be required for the pumps.

8.7.9 Statistics Con guration

The statistics con guration sub-menu allows the installer to

view Burner Cycles, Burner Run Time, DHW Pump Cycles,

Boiler Pump Cycles, and System Pump Cycles.

This sub-menu is ‘Read-Only’

8.7.10 High Limits

The outlet High limit can be adjusted using the installer

password. After a change is made, the control will

lockout and require a Safety Veri cation (see Section 9.3

for more details on Safety Veri cation).

8.7.11 Stack Limits

8.7.12 Anti-Condensation Con guration

Anti-condensation (frost protection) is enabled/disabled

on this screen

8.7.8 Pump Connections (cont)

200 Lafayette St.

Middleville, MI 49333

Warranty: (800) 531-2111