Installation / Operation Instruction Manual

Page 18
80/105 150/199 285 399 500 600 750/850
Flow Switch Kit (ow switch, 2 wires, and an NPT tee)
1 1 1 1
Exhaust Adapter Assembly
1 1
Grid Screen, Venting
2 2 2
Vent Adapter, 6” PVC to 6” Stainless Steel
1
NPT Pipe (for ow switch)
1 1 1 1
Grommets for ow switch wires
2 2 2 2
Some accessory
items may be shipped
in separate packages.
Verify receipt of all
packages listed on
the packing slip.
Inspect everything for
damage immediately
upon delivery, and
advise the carrier
of any shortages or
damage. Any such
claims should be led
with the carrier.
The carrier, not the
shipper, is responsible
for shortages and
damage to the
shipment whether
visible or concealed.
Optional Indoor Pump Kit
1.H The Installation Kit (installation parts box).
The Indoor models are shipped in a single crate with the Installation Kit (cardboard box). Check the contents of
the Installation Kit with the items listed in Figure 10 and Figure 11. Additional parts may be packed inside the unit.
Figure 10. Standard Installation Components
Figure 11. Additional Components, depending on model size and conguration.
Doc ument Bag
(all documents in one bag)
Term inal Block Jumper
(the Terminal Block Jumper is in the document bag)
Sen sor Kits (Tank, Outdoor and System Sensors, all in the
same bag (2 boxes, a sensor, and a wire).
Volume Water Heaters will not have an Outdoor Sensor
Air I ntake Terminal Assembly
(elbow and a screen)
Vent Pipe
Exh aust Terminal Assembly
(end pipe and a screen),
Tem p/Pressure Gauge Kit
(a bushing, an NPT Tee, and the gauge in a small box)
B RADFORD W HITE