Spec Sheet
ElectriFLEX LD
™
(Light-Duty)
Commercial Lowboy Electric Water Heater
Bradford White ElectriFLEX LD
™
Lowboy Electric Models Feature:
n Applications—Lowboy models are ideal for installations where space is
minimal and are perfect for tight installations such as a closet or under a
counter.
n Fully Automatic Thermostat Controls—Fast acting surface-mount
thermostats with a maximum setpoint of 175°F and a high limit energy cut-off
(manual reset) for safety.
n Direct Heat Transfer With Immersed Elements—Transfers heat directly
and efficiently to the water. Screw-in style.
n Factory-Installed Hydrojet
®
Total Performance System—Sediment build-
up reducing device that also increases first hour rating of hot water while
minimizing temperature build-up in tank.
n Vitraglas
®
Lining—An exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas
®
) is fused to the steel surface by firing at a temperature of
over 1600°F (871°C).
n Insulation System—2" (51mm) Non-CFC foam insulation covers the
sides and top of the tank, reducing heat loss. This results in less energy
consumption, improved efficiencies, and jacket rigidity.
n Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings
extend water heater life and simplify water line connections.
n Factory-Installed Heat Traps—Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation.
n Protective Anode Rod—Provides added protection against corrosion for
long-term, trouble-free service.
n Steel Tank—Heavy gauge steel automatically formed, rolled, and welded.
n Field Convertible—Units are shipped from factory standard Three
Phase, Non-Simultaneous and can be converted to Single Phase and/or
Simultaneous operation in the field.
n Field Conversion Kits—Change voltage and kW in the field (see options on
following page).
n T&P Relief Valve Installed—Side T&P is standard. Optional top T&P location
is available and must be specified when ordering.
Photo is of
LE230LN3-3
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821;
7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238;
7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031;
2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
C1411-G-0422 CANADA
Copper Screw Type Immersion Element
(INCOLOY
®
type immersion element available upon request)
3 or 5-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.