Product Overview

6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Vitraglas
®
is a registered trademark of Bradford White
®
Corporation.
107-B-1212-A
Manufactured Home Direct Vent
Energy Saver Gas Water Heater
The Manufactured Home Models feature:
■ Housing and Urban Development—This water heater is designed in
accordance with H.U.D. and is certified for installation in a manufactured
home (mobile home) only and must be installed in an enclosure that will
completely separate the water heater combustion and venting system from
the dwelling interior.
■ Sealed Combustion Roof Jack Kit—Ordered separately and includes an
adjustable air intake tube, roof jack and hardware. Must specify roof jack
size when ordering. Available in 12", 18"/32", 32"/60" or 48"/95" lengths.
■ Flue Baffle—Designed to maximize the amount of heat absorbed in the
lower portion of tank. Minimizes air movement in the heater during standby
periods to decrease heat loss up the flue.
■ Heat Traps—Installed on hot water outlet to minimize heat loss through
piping.
■ Vitraglas
®
Lining—Bradford White tanks are lined with a exclusively
engineered enamel formula that provides superior protection from the highly
corrosive effects of hot water. This formula (Vitraglas
®
) is fused to the steel
surface by firing at a temperature of over 1600ºF.
■ Fully Automatic Controls—Fast acting surface-mount thermostats for
automatic temperature control. Factory installed sensitive manual reset
energy cutoff for safety to prevent overheating.
■ 1" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity.
■ Water Connections—3⁄4" NPT factory installed true dielectric fittings
extend water heater life and ease installation.
■ Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
■ T&P Relief Valve—Installed.
■ Low Restriction Brass Drain Valve—Durable tamper proof design.
■ Convertible Gas Control—Easily convertible control for use with either
Propane or Natural Gas.
Photo is of
M-I-MS30T6LX