Spec Sheet

Sales: 800-523-2931

Fax 215-641-1612

24/7 Technical Support: 800-334-3393

Email techserv

bradfordwhite.com

Products made by Bradford White are manufactured in the United States using the finest raw materials and components from around the world.

Sample Specification:

The Carbon Steel storage tank shall be a Bradford White Top Coat model with a nominal rated storage capacity of not less

than_________gallons (______liters), and overall dimensions of______ inches (_______cm.) in height, by_________inches (________

cm.) in diameter. The tank shall be Vitraglas

lined, and be built in accordance with ASME Boiler and Pressure Vessel Code ASME

IV, Part HLW for 125 PSI (862 kPa) and so labeled, with a working pressure of _________PSI (_________kPa). The Carbon Steel

storage tank shall carry a five (5) year limited warranty (ten (10) year limited warranty available on Double Vitraglas

lining).

Commercial Large Volume Carbon Steel Storage Tanks

Printed in U.S.A.482-F-1021

General

Front water connections 3" (76mm) NPT (except where noted). T&P tapping 1¼" (32mm) NPT. Aquastat tapping 3⁄4" (19mm) NPT.

Most storage tanks are manufactured with convex heads and bases. Some manufacturers list the tank capacity as “Nominal.”

Generally, this is the theoretical capacity calculated assuming a tank was actually manufactured using a flat (instead of convex)

head and base. Bradford White lists both Actual and Nominal capacity for comparison purposes.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.