Spec Sheet

ManualsBrandsBradford White ManualsCommercialLarge Volume Stainless Steel Top Coat Storage Tank - Canada

Sample Specification:

The stainless steel storage tank shall be a Bradford White Top Coat model with a nominal rated storage capacity of not less than_________gallons (______liters),

and overall dimensions of______ inches (_______cm.) in height, by_________inches (________cm.) in diameter. The tank shall be constructed of stainless steel

and be built in accordance with ASME Boiler and Pressure Vessel Code ASME IV, Part HLW for 125 PSI (862 kPa) and so labeled, with a working pressure of

_________PSI (_________kPa). The stainless steel storage tank shall carry a ten (10) year limited warranty (twenty-five (25) year limited warranty available on

Passivated Duplex Stainless Steel).

Commercial Large Volume Stainless Steel Storage Tanks

General

Front water connections 3" (76mm) NPT (except where noted). T&P tapping 1¼" (32mm) NPT. Aquastat tapping 3⁄4" (19mm) NPT. Most storage tanks are

manufactured with convex heads and bases. Some manufacturers list the tank capacity as “Nominal.” Generally, this is the theoretical capacity calculated

assuming a tank was actually manufactured using a flat (instead of convex) head and base. Bradford White lists both Actual and Nominal capacity for

comparison purposes.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Printed in U.S.A.

Customer Service / Sales: 1-866-690-0961 / 905-203-0600

24/7 Technical Support: 800-334-3393

Email techserv

bradfordwhite.com

C485-F-1021 CANADA