Spec Sheet

ManualsBrandsBradford White ManualsCommercialLarge Volume Stainless Steel Top Coat Storage Tank - Canada

10 or 25-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete copy

of the warranty included with the heater.

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419;

7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379;

7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515;

2,476,685; 2,239,007; 2,092,105; 2,107,012. HydroJet HC

is a registered trademark of Bradford White

Corporation.

485-F-1021

Commercial Large Volume Stainless Steel

Top Coat Storage Tanks

The Large Volume Stainless Steel Top Coat Models Feature:

n Passivated 316L (10-year warranty) & Duplex Stainless Steel (25-year

warranty).

n All Tanks Are Constructed and Certified—In accordance with ASME Sect.

IV, Part HLW for 125 PSI (862 kPa). 150 PSI (1034 kPa) is available as an

option.

n Vertical or Horizontal Construction—Horizontal models require two

saddles and have two additional 3" (76mm) NPT fittings.

n Sprayed-On Rigid Insulation Top Coat—2

⁄4" (57mm) (R-value of 16) of

high density polyurethane foam is encapsulated with a 100% acrylic top coat

that is formulated to withstand extreme weather and a full range of conditions.

n Optional Hydrojet HC

—Stainless steel, dielectrically isolated recirculation

tube minimizes turbulence and directs the hottest water to the top of the tank

to maximize hot water delivery.

n No Anode Rods—Eliminates time and cost to service anode rods.

n Water Connections—Two female NPT fittings are located on the front for

ease of service and installation (reference chart for sizes). Additional size

fittings are available as an option.

n Fully Customizable—Custom tank gallon capacities and tapping sizes/

locations.

n Optional Hand Hole Cleanout and Manway—4"x 6" (102mmx152mm)

diameter Hand Hole cleanout and 12"x16" (305mmx406mm) diameter

Manway opening allow removal of sediment and inspection of interior surface.

-- Manway standard on all tanks with a vessel diameter of 42" (1067mm)

or greater.

n One 3/4" (19mm) NPT Aquastat Fitting—Located in the lower part of the

tank.

n Designed for Storage of Potable Water up to 180°F (82°C).

n Lifting Lugs—Standard.

Photo is of

NV303TS210A

Summary of content (4 pages)

PAGE 1
Commercial Large Volume Stainless Steel Top Coat Storage Tanks Photo is of NV303TS210A The Large Volume Stainless Steel Top Coat Models Feature: n Passivated 316L (10-year warranty) & Duplex Stainless Steel (25-year warranty). n All Tanks Are Constructed and Certified—In accordance with ASME Sect. IV, Part HLW for 125 PSI (862 kPa). 150 PSI (1034 kPa) is available as an option. n Vertical or Horizontal Construction—Horizontal models require two saddles and have two additional 3" (76mm) NPT fittings.
PAGE 2
Commercial Large Volume Stainless Steel Storage Tanks Stainless Steel Top Coat Models Model Number N†193TS*A N†229TS*A N†260TS*A N†303TS*A N†318TS*A N†340TS*A N†344TS*A N†375TS*A N†397TS*A N†432TS*A N†449TS*A N†486TS*A N†502TS*A N†504TS*A N†555TS*A N†558TS*A N†572TS*A N†630TS*A N†658TS*A N†702TS*A N†752TS*A N†774TS*A N†834TS*A N†846TS*A N†940TS*A N†981TS*A N†1119TS*A N†1128TS*A N†1174TS*A N†1219TS*A N†1306TS*A N†1327TS*A N†1395TS*A N†1457TS*A N†1635TS*A N†1689TS*A N†1761TS*A N†1814TS*A N†1983TS*A N†2061TS*
PAGE 3
Commercial Large Volume Stainless Steel Storage Tanks C (mm) 7" (178) 11/4" NPT Relief (32) D NPT D NPT B D NPT 11/4" NPT (32) Relief 3 /4" NPT (19) Aquastat A 12" (305) 3 /4" NPT D NPT (19) Aquastat 3" NPT (76) 3 /4" NPT (19) Aquastat 8" (203) 9"(229) 3"(76) NPT NPT Drain A 3"(76) NPT NPT Drain Tank Options: • Hand Hole (4"x6") (102mm x 152mm) ................... • Manway (12"x16") (305mm x 406mm) ...................
PAGE 4
Commercial Large Volume Stainless Steel Storage Tanks Sample Specification: The stainless steel storage tank shall be a Bradford White Top Coat model with a nominal rated storage capacity of not less than_________gallons (______liters), and overall dimensions of______ inches (_______cm.) in height, by_________inches (________cm.) in diameter.