Spec Sheet

©2021, Bradford White Corporation, USA. All rights reserved.
Sales: 800-523-2931
n
Fax [phone]
24/7 Technical Support: 800-334-3393
n
Email techserv
@
bradfordwhite.com
Products made by Bradford White are manufactured in the United States using the finest raw materials and components from around the world.
Sample Specification:
The stainless steel storage tank shall be a Bradford White Top Coat model with a nominal rated storage capacity of not less than_________gallons (______liters),
and overall dimensions of______ inches (_______cm.) in height, by_________inches (________cm.) in diameter. The tank shall be constructed of stainless steel
and be built in accordance with ASME Boiler and Pressure Vessel Code ASME IV, Part HLW for 125 PSI (862 kPa) and so labeled, with a working pressure of
_________PSI (_________kPa). The stainless steel storage tank shall carry a ten (10) year limited warranty (twenty-five (25) year limited warranty available on
Passivated Duplex Stainless Steel).
Printed in U.S.A.485-F-1021
Commercial Large Volume Stainless Steel Storage Tanks
General
Front water connections 3" (76mm) NPT (except where noted). T&P tapping 1¼" (32mm) NPT. Aquastat tapping 3⁄4" (19mm) NPT. Most storage tanks are
manufactured with convex heads and bases. Some manufacturers list the tank capacity as “Nominal.” Generally, this is the theoretical capacity calculated
assuming a tank was actually manufactured using a flat (instead of convex) head and base. Bradford White lists both Actual and Nominal capacity for
comparison purposes.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.