Spec Sheet
Commercial Large Volume Stainless Steel
Jacketed and Insulated Storage Tanks
The Large Volume Stainless Steel Jacketed and Insulated Storage Tank
Models Feature:
n Passivated 316L (10-year warranty) & Duplex Stainless Steel (25-year
warranty).
n All Tanks Are Constructed and Certified— In accordance with ASME
Sect.IV, Part HLW for 125 PSI (862 kPa). 150 PSI (1034 kPa) is available as
an option.
n Vertical or Horizontal Construction—Horizontal models require two
saddles and have two additional 3" (76mm) NPT fittings.
n Steel Jacket—Sturdy heavy gauge painted steel jacket.
n 2" (51mm) (R-value of 12.5) High Density Foam Insulation—Covers the
side and top of tank, reducing the amount of heat loss. This results in less
energy consumption, improved operation efficiencies, and jacket rigidity.
n Optional Hydrojet HC
®
—Stainless steel, dielectrically isolated recirculation
tube minimizes turbulence and directs the hottest water to the top of the
tank to maximize hot water delivery.
n No Anode Rods—Eliminates time and cost to service anode rods.
n Water Connections—Two female NPT fittings are located on the front
forease of service and installation (reference chart for sizes). Additional size
fittings are available as an option.
n Fully Customizable—Custom tank gallon capacities and tapping sizes/
locations.
n Optional Hand Hole Cleanout and Manway—4"x 6" (102mmx152mm)
diameter Hand Hole cleanout and 12"x16" (305mmx406mm) diameter
Manway opening allow removal of sediment and inspection of interior
surface.
-- Manway standard on all tanks with a vessel diameter of 42" (1067mm)
or greater.
n One 3/4" (19mm) NPT Aquastat Fitting—Located in the lower part of the
tank.
n Designed for Storage of Potable Water up to 180°F (82°C).
Photo is of
NV303JS210A
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419;
7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379;
7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515;
2,476,685; 2,239,007; 2,092,105; 2,107,012. Hydrojet HC
®
is a registered trademark of Bradford White
®
Corporation.
484-F-1021
10 or 25-Year Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete copy
of the warranty included with the heater.
Sample Specification:
The stainless steel storage tank shall be a Bradford White Jacketed and Insulated model with a nominal rated storage capacity of not less than_________
gallons (______liters), and overall dimensions of______ inches (_______cm.) in height, by_________inches (________cm.) in diameter. The tank shall be
constructed of stainless steel, and be built in accordance with ASME Boiler and Pressure Vessel Code ASME IV, Part HLW for 125 PSI (862 kPa) and so
labeled, with a working pressure of _________PSI (_________kPa). The stainless steel storage tank shall have Non-CFC foam insulation and carry a ten (10)
year limited warranty (twenty-five (25) year limited warranty available on Passivated Duplex Stainless Steel).
General
Front water connections 3" (76mm) NPT (except where noted). T&P tapping 1
1
⁄4" (32mm) NPT. Aquastat tapping 3⁄4" (19mm) NPT. Most storage tanks are
manufactured with convex heads and bases. Some manufacturers list the tank capacity as “Nominal.” Generally, this is the theoretical capacity calculated assuming
a tank was actually manufactured using a flat (instead of convex) head and base. Bradford White lists both Actual and Nominal capacity for comparison purposes.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.