Application Manual

| Infiniti™ K 160-1995 Application Manual
Data subject to change 10.2018 | Bradford White Water Heaters
2 INTRODUCTION
This Applications Manual is intended to present some of the
most common applications of the Infiniti® K Series tankless
water heaters. Application drawings are shown with both
piping and corresponding electrical schematics where
applicable. Auxiliary equipment depicted does not
necessarily represent any one manufacturer or specific model
number. There are a wide variety of techniques, practices and
piping strategies possible when installing water heating
appliances. It is the responsibility of the installing contractor
to determine the best solution for the application.
Although this manual covers many common applications for our
products, system possibilities are virtually endless. Should you
encounter an application that is not covered in this manual or have
any questions regarding any of its content, we encourage you to
contact your local sales representative or us directly at Bradford
White Corporation.
This manual is not a substitute for any of the appliance installation
manuals. All specifi cations are subject to change.
Installation must conform with local codes or, in the
absence of local codes, the National Fuel Gas Code ANSI
Z223.1/NFPA 54.
In Canada: Installation must conform with CGA B149.(1,2)
INSTALLATION CODES and/or local installation codes.
NOTICE: All drawings are conceptual in nature and do not
address all design, installation or safety considerations.
Additional safety and/or auxiliary equipment may be
needed. Drawings are for reference use by ocials,
designers and licensed installers. It is expected that
installers have adequate knowledge of accepted
industry practices for the equipment, procedures, and
applications involved. It is the responsibiltiy of the
installer to ensure that the installation is in accordance
with local building codes.
| Infiniti® K 160-199 Application Manual
Data subject to change 10.2019 | Bradford White Water Heaters
5