Spec Sheet

15-Year Limited Residential Heat Exchanger Warranty.
5-Year Limited Parts Warranty.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
1152-F-0721
The Infiniti
®
K Series Tankless Condensing Water Heater Models feature:
n ENERGY STAR
®
Qualified – Meet or exceed requirements for ENERGY STAR
®
per the latest ENERGY STAR
®
criteria revision, as well as most utility rebate
programs.
n SRT
™
Scale Reduction Technology – Significantly reduces the incidence of
scale build-up known to result in poor performance, additional maintenance,
and pre-mature component or product failure.
n STEADISET
®
Technology – Virtually eliminates cold water sandwich without
the need for an internal buffer tank and recirculation pump.
n Self-Calibrating Fan and Gas Valve – Simple combustion management
system uses self-calibrating sensors to automatically configure air fuel ratio for
flue length, gas type, and altitude - without a combustion analyzer.
n Modulation – Segmented burner with 22:1 turn down ratio.
n Top Water Connections – Top water connections for easy retrofit.
n Built-In Digital Control – Temperature can be adjusted on the front control
panel (100-140°F) (38°C-60°C).
n Active Bypass – Achieves superior temperature stability (
±
2°F) (
±
1°C).
n External Recirculation Pump Wiring – Installed. Built-in controls provides
precise operation of external recirculation pump with, or with out, additional
external temperature sensor (Recirculation pump sold separately).
n Venting Length Up To 280 ft. – Direct vent, power vent, and concentric
venting terminations approved. PP, PVC, and CPVC approved venting material
(refer to I&O manual for details). 2" (51mm) vent up to 60 ft. (18m) and 3"
(76mm) vent up to 280 ft. (85m).
n Gas Connection Flexibility – 1/2" (13mm), 3/4" (19mm), or 1" (25mm)
connections permitted (refer to I&O manual for details).
n Inlet Water Filter – External access for easy maintenance.
n Space Saving Installation – Compact size for tight installations.
n Built In Freeze Protection – Protects unit from freezing. Activates
automatically when the water heater is plugged in.
n Easy LP Gas Field Convertibility – Purchase of additional kit NOT required to
convert from NG to LP.
n Heat Exchanger – Primary Copper with Secondary Stainless Steel
(316L) heat exchanger helps maximize life and minimize scale build-up.
n Pressure Relief Valve – Included (Integral port).
n Built In Flush Ports – For servicing/de-scaling.
n Flushing condensate trap.
n Intelligent Cascading Kit (Optional) – Up to 24 units can be connected
together with ease.
n Complies with the latest Ultra-Low NOx requirement (14 ng/J NOx limit).
n Optional Condensate Neutralizer Kit – p/n A2123601.
FEATURING:
Infiniti
®
K Series Tankless
(Condensing) Gas Water Heater
Indoor Models