Spec Sheet

12-Year Limited Residential Heat Exchanger Warranty.
5-Year Limited Commercial and Hydronic Heat Exchanger Warranty.
5-Year Limited Residential and Commercial Component Parts Warranty.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
EverHot
®
is a registered trademark of Bradford White
®
Corporation.
106-B-0712-A
EverHot
®
Tankless Energy Saver
Gas Water Heater
The EverHot
®
Tankless Water Heater Models feature:
ENERGY STAR
®
Qualified—These models qualify for the January 1st, 2009
minimum ENERGY STAR
®
EF requirement, as well as most utility rebate
programs.
Interior and Exterior Models—Twelve units (Natural Gas and Propane Gas)
with self regulating maximum BTU/hr. inputs ranging from 150,000-199,000.
Digital Main Controller— Interior models have a digital controller
integrated into the front panel of the water heater with a default temperature
range of 96°F-120°F (140°F maximum). Exterior models are shipped with a
primary remote controller with a default temperature range of 96°F-120°F
(140°F maximum). An optional Main Controller/Residential
(p/n 239-44509-00) can be wired remotely and provides a default
temperature range of 96°F-120°F (140°F maximum).
Commercial Conversion Capability—For application flexibility, all models
can be converted to a commercial model with the use of a commercial
controller.
Commercial Controller—An optional Main Controller/Commercial
(p/n 239-47805-00) is available for commercial and hydronic applications
(maximum temperature setting for each model on reverse side).
Continuous Flow—Supplies hot water continuously at the temperature set
point.
Heat Exchanger—Nine pass design to maximize heat transfer and
efficiency.
Direct Electronic Ignition—No standing pilot.
Fully Automatic Controls—Outgoing water temperature is monitored by a
built-in sensor. Burner and combustion blower modulate between minimum
and maximum input to maintain setpoint temperature.
Diagnostic Capabilities—Error messages in numerical codes are displayed
on primary control.
Space Saving Installation—Compact size for tight installations (mounts on
the wall).
Lime Accumulation Sensor—Built into the heat exchanger to alert of
build-up.
Co-Axial Venting—Interior models can be vented horizontally through a
wall or vertically through the roof. Maximum equivalent vent length is 41ft.
Interior models have dedicated venting system components that must be
ordered separately (see I&O manual for specific venting components).
Interior Model
Exterior Model
FEATURING:

Summary of content (2 pages)