Installation / Operation Instruction Manual

5 238-50320-00A 3/13
Commercial and Residential Power Direct Vent / Power Vent Models:
For installation of commercial and residential power
vent models, install the male end of the PVC to
PolypPro adapter into the air intake pipe tee as shown.
Install the adapter connector clamp over the PVC adapter.
Then install the elbow or vent pipe section into the PVC
adapter. Tighten the clamp bands of the adapter connector
to the air intake tee and pipe elbow or straight pipe section to
secure vent pipe to the water heater air intake tee as shown
below.
Air Intake Pipe Tee
Adapter Connector Clamp – Fits over Air Intake
Tee and next vent pipe section as shown.
PVC Adapter
Fitting