Instructions / Assembly

Assembly Instructions
e Black Bradley Smoker
(Models: BTIS1; BTISCE240EU)
For e Original Bradley Smoker See Page 10
For 4 and 6 Rack Digital Smokers See Page 14
Refer to Part Numbers in the Bradley Smoker External Components
List and Internal Components List Diagrams
How to Assemble the
Bradley Smoker®
1. Remove smoker from box.
2. Take all packaged parts out of
smoker.
3. Remove all protective
packaging materials from parts.
Install Smoke Generator:
•Attach smoke generator (1) to
the smoker tower (2).
•Aim the bisquette burner (F)
toward the tower opening.
•Align smoke generator key
holes to smoker tower locating
supports (3).
•Secure the generator by pushing
down rmly.
•Insert the feeder tube (4) on top
of the smoke generator and push
down rmly then load it with the
desired number of Bradley Flavor
Bisquettes®.
•Plug the short power cord
(E-not shown) from the smoke
generator into the smoker tower.
Set Up Smoker Tower:
•Place Racks (C) onto side
supports.
•Place Drip Tray (B) “V” facing
down beneath the Racks on the
brass side pins.
•Place the Rectangular Tray (J)
on the bottom of the Smoker.
•Fill the Drip Bowl (D) half full
of water and place in the center
of the Rectangular Tray to catch
burnt Bisquettes. During a long
smoking period, the Drip Bowl
will require changing the water
every 2-3 hours. Plug the Long
Power Cord (A) for the smoke
generator into an approved
grounded electrical outlet.
To Remove Smoke
Generator:
• Unplug short jumper cord (E).
• Detach smoke generator from
the smoker tower by raising the
smoke generator gently upward
and pull it outward.
Handling of Packaging
All packaging should be discarded
as per the regulations in your area.
e box can be used only to store
smoker when not in use. e box
should not be used as a cover
when smoker is in use.
6