Use and Care Manual
10
Assembly Instructions
e Original Bradley Smoker (Model: BS611; BS611EU)
For e Black Black Smoker See Page 6, For 4 and 6 Rack Digital Smokers See Page 14
Refer to Part Numbers in External Components List, Internal Components List and Electrical
Connection Set Up
How to Assemble e
Original Bradley Smoker®
1. Remove smoker from box.
2. Take all packaged parts out of
smoker.
3. Remove all protective packaging
materials from parts.
Install Smoke Dial Generator:
•Attach smoke dial generator (1)
to the smoker tower (2).
•Aim the bisquette burner (F)
toward the tower opening.
•Align smoke dial generator key
holes to smoker tower locating
supports (3).
•Secure the smoke dial generator
by pushing down rmly.
•Insert the feeder tube (4) on top
of the smoke dial generator and
push down rmly then load it with
the desired number of Bradley
Flavor Bisquettes®.
•Plug the short power cord (E-not
shown) from the smoke dial
generator into the smoker tower.
Set Up Smoker Tower:
•Place Racks (C) onto side
supports.
•Place Drip Tray (B) “V” facing
down beneath the Racks on the
brass side pins.
•Place the Rectangular Tray (J) on
the bottom of the Smoker.
•Fill the Drip Bowl (D) half full
of water and place in the center
of the Rectangular Tray to catch
burnt Bisquettes. During a long
smoking period, the Drip Bowl
will require changing the water
every 2-3 hours.
•Plug the Long Power Cord (A)
for the smoke generator into an
approved grounded electrical
outlet.
To Remove Smoke Dial Generator:
•Unplug short jumper cord (E).
•Detach smoke dial generator
from the smoker tower by raising
the smoke dial generator gently
upward and pull it outward.
Handling of Packaging
All packaging should be discarded
as per the regulations in your area.
e box can be used only to store
smoker when not in use. e box
should not be used as a cover when
smoker is in use.