OWNERS MANUAL for BTIS1 BS611 BTISCE240EU BS611EU The Black Bradley Smoker 120V The‘Original’ Bradley Smoker 120V The Black Bradley Smoker 240V The‘Original’ Bradley Smoker 240V BTDS76P BTDS108P BTDS76CE-EU BTDS108CE-EU Bradley 4 Rack Digital Smoker 120V Bradley 6 Rack Digital Smoker 120V Bradley 4 Rack Digital Smoker 240V Bradley 6 Rack Digital Smoker 240V Z1079 Bradley Technologies Canada Inc.
Dear Sir or Madam, “Revolutionary Smoking Technology for Household Chefs” Welcome to the wonderful experience of backyard smoking and slow roast cooking. The Bradley Smoker is an insulated smoker oven designed to automatically generate a continuous flow of clean smoke. It is an outdoor electrical appliance that enables one to cook, roast, hot smoke, as well as cold smoke food with consistently superior results using minimal effort.
Important Safety Warnings Basic Safety Precautions in their use. • The extension cord should be a grounding type 3-wire cord. • The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance. • The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
When in Use (cont.) • Do not use during an electrical storm or in windy conditions. • Do not use near gasoline or other flammable liquids, gases, or where flammable vapors may be present. • Place in an area where children and pets cannot access. • Do not immerse in water. • Empty drip bowl every 2 to 3 hours of burnt wood bisquettes and refill with fresh water. After Each Use • Unplug smoker when it is not in use. See Maintenance Procedures.
Trouble Shooting No Power to Smoker: Check that all plugs are correctly and firmly inserted into sockets. Check fuse (located on smoke generator). Check to make sure the outlet, Ground Fault Circuit Interrupter (GFCI), has not been tripped. Bisquettes will not Advance: Check the drive guide and clear all loose wood chips. By cleaning the smoke generator, bisquette jamming and undue wear and tear can be avoided.
Assembly Instructions The Black Bradley Smoker (Models: BTIS1; BTISCE240EU) For The Original Bradley Smoker See Page 9 For 4 and 6 Rack Digital Smokers See Page 13 Refer to Part Numbers in the Bradley Smoker External Components List and Internal Components List Diagrams Place the Rectangular Tray (J) on the bottom of the Smoker. • Fill the Drip Bowl (D) half full of water and place in the center of the Rectangular Tray to catch burnt Bisquettes.
The Black Bradley Smoker® BTIS1 and BTISCE240EU External Components List 7 2 13 9 4 8 16 3 1 5 14 6 12 3 11 10 15 External Parts List 1. 2. 3. 4. 5. 6. 7. 8. Smoke Generator Smoker Tower Generator Supports Feeder Tube Smoke Generator Indicator Light Bisquette Advance Button Damper with handle (not shown) Door 9. 10. 11. 12. 13. 14. 15.
The Black Bradley Smoker® BTIS1 and BTISCE240EU Internal Components List C H E B L G A D F I J K Internal Parts List A) B) C) D) E) F) Long Power Cord Drip Tray Cooking Racks Drip Bowl Short Jumper Cord (not shown) Connects Generator Bisquette Burner G) H) I) J) K) L) 7 500 Watt Heating Element Flavor Bisquettes® (not included) Drive Guide Bottom Rectangular Tray Door Hinge Porcelain Holder
Operating Guidelines for the BTIS1 and BTISCE240EU - The Black Bradley Smoker Refer to part numbers in the External Components List Diagram Seasoning & Preparation For Use Getting Started • After seasoning the smoker, refill the Drip Bowl half full of water. • Turn on the Smoke Generator by pressing the Generator On/Off switch (12) this preheats the Bisquette burner. • When the Smoker Generator indicator light (5) is on, this means the Generator has power.
Assembly Instructions The Original Bradley Smoker (Model: BS611; BS611EU) For The Black Black Smoker See Page 5 For 4 and 6 Rack Digital Smokers See Page 13 Refer to Part Numbers in External Components List, Internal Components List and Electrical Connection Set Up Place the Rectangular Tray (J) on the bottom of the Smoker. • Fill the Drip Bowl (D) half full of water and place in the center of the Rectangular Tray to catch burnt Bisquettes.
The Original Bradley Smoker® BS611 and BS611EU External Components List 7 2 12 200 9 250 100 120 140 300 160 180 350 80 60 40 20 0 0 °C °F 200 0 40 4 14 8 5 HIGH OFF 3 LOW 10 ON 1 OFF 11 MEDIUM TEMPERATURE 14 BISQUETTE ADVANCE 6 3 13 External Parts List 1. 2. 3. 4. 5. 6. 7. Smoke Dial Generator Smoker Tower Generator Supports Feeder Tube Smoke Generator Indicator Light Bisquette Advance Button Damper with handle (not shown) 8. 9. 10. 11. 12. 13. 14.
The Original Bradley Smoker® BS611 and BS611EU Internal Components List C H E B L G A D ON OFF TTE BISQUE E NC ADVA F I J K Internal Parts List A) B) C) D) E) F) Long Power Cord Drip Tray Cooking Racks Drip Bowl Short Power Cord (not shown) Connects Generator Bisquette Burner G) H) I) J) K) L) 11 500 Watt Heating Element Flavor Bisquettes® (not included) Drive Guide Bottom Rectangular Tray Door Hinge Porcelain Holder
Operating Guidelines for the BS611 and BS611EU - The Original Bradley Smoker Refer to part numbers in the External Components List Diagram Seasoning & Preparation For Use Getting Started • After seasoning the smoker, refill the Drip Bowl half full of water. • Turn on the Smoke Generator by pressing the Generator On/Off switch (11) this preheats the Bisquette burner. • When the Smoker Generator indicator light (5) is on, this means the Generator has power.
Assembly Instructions 4 Rack Digital Smoker (Model: BTDS76P; BTDS76CE-EU) 6 Rack Digital Smokers (Model: BTDS108P; BTDS108CE-EU) For Original Bradley Smoker Assembly Instructions See Page 9 Refer to Part Numbers in External Components List, Internal Components List and Electrical Connection Set Up Plug the Long Power Cord (3) into the power receptacle (E). • How to Assemble the Bradley Digital Smoker® Set Up Smoker Tower: • Place Racks, either four or six (B) onto side supports.
The Bradley Digital Smoker® BTDS76P and BTDS76CE-EU BTDS108P and BTDS108CE-EU External Components List Exterior Parts List 1. Digital Smoke Generator 2. Smoke Tower 3. Generator Supports (not shown) 4. Feeder Tube 5. Digital Display Panel (see page 17) 6. Damper 7. Door 8. Door Seal 9. Rubber Feet 10.
The Bradley Digital Smoker® BTDS76P and BTDS76CE-EU BTDS108P and BTDS108CE-EU Internal Components List Internal Parts List A) Drip Tray B) Cooking Racks (4 or 6) C) Drip Bowl D) Bottom Rectangular Tray E) Bisquette Burner (Bisquettes not included) F) Heating Element G) Top Door Hinge H) Lower Door Hinge I) Brass Pin J) Porcelain Insulator 15
1. Sensor Cable 2. Short Power Cord 3. Long Power Cord 4. Wall Outlet A. Sensor Receptacle B. Sensor Receptacle C. Male Receptacle D. Female Receptacle E.
Display Function Guideline Digital Smoke Generator • Smoke Generator operated by left side control buttons. • Press “On/Off Smoker” to turn Smoke Generator on. • Press “>>> Wood” to advance Bisquettes onto Burner. Each press advances Bisquette one spot. • Press “Smoker Timer Set” and then “v ^” to desired length of smoking time. • Press “Smoker Timer Set” again to start 20 minute automatic advance. • Press “On/Off Smoker” to turn Smoke Generator off.
Operating Guidelines for the BTDS76P, BTDS76CEEU, BTDS108P and BTDS108CEEU - The Bradley Digital Smoker Refer to part numbers in the External Components List Diagram Seasoning & Preparation For Use • Seasoning the Bradley Digital Smoker is an ongoing process, the more you use it, the better tasting the foods will be. • The Seasoning Process is mainly to remove the impartial smells and flavors from your smoker.
WARRANTY The Bradley Smoker carries with it a 1 year limited warranty against manufacturing defects. Requirements and Limitations: Warranty is effective from the date of purchase. Keep your sales receipt as proof of purchase date. Warranty is limited to repair or replacement of part as determined by Bradley Technologies Inc. Bradley Technologies at its discretion will provide a replacement part for any component found by Bradley Technologies to be defective and shall not be responsible for any re-assembly.
