Owners Manual for BTIS1 BTST02 BTISCE240EU BTSTCE240EU The ‘Original’ Bradley Smoker 120V Stainless Steel Bradley Smoker 120V The ‘Original’ Bradley Smoker 240V Stainless Steel Bradley Smoker 240V BTDS76P BTDS108P Bradley 4 Rack Digital Smoker 120V Bradley 6 Rack Digital Smoker 120V BTDS76CE-EU BTDS108CE-EU Bradley 4 Rack Digital Smoker 240V Z1079 Bradley Technologies Canada Inc.
Dear Sir or Madam, “Revolutionary Smoking Technology for Household Chefs” Welcome to the wonderful experience of backyard smoking and slow roast cooking. The Bradley Smoker is an insulated smoker oven designed to automatically generate a continuous flow of clean smoke. It is an outdoor electrical appliance that enables one to cook, roast, hot smoke, as well as cold smoke food with consistently superior results using minimal effort.
Important Safety Warnings Basic Safety Precautions • Do not use any other type of wood other than Bradley Flavor Bisquettes®. • Properly dispose of all packaging. • Read all instructions. • Do not touch hot surfaces. Use handles or knobs. • To protect against electric shock, do not immerse cord or plugs in water or other liquids. • Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use and before cleaning.
General Maintenance Refer to the External Components List & Internal Components List Diagrams Important Safety Precautions • The Bradley Smoker must be maintained and cleaned after each use. • Unplug the Long Power Cord prior to commencement of any maintenance or cleaning. • Do not immerse smoker in water. • Do not spray inside of smoker with any kind of appliance cleaner. • Do not cover or seal the racks or drip tray with aluminum foil. This can cause severe damage to your smoker.
Trouble Shooting No Power to Smoker: Check that all plugs are correctly and firmly inserted into sockets. Check fuse (located on smoke generator). Check to make sure the outlet, Ground Fault Circuit Interrupter (GFCI), has not been tripped. Bisquettes will not Advance: Check the drive guide and clear all loose wood chips. By cleaning the smoke generator, bisquette jamming and undue wear and tear can be avoided.
Assembly Instructions Original Black Bradley Smoker (Model: BTIS1; BTISCE240EU) Stainless Steel Bradley Smoker (Model: BTST02; BTSTCE240EU) For 4 Rack Digital Smoker and 6 Rack Digital Smoker Assembly Instructions See Page 9 Refer to Part Numbers in the Bradley Smoker External Components List and Internal Components List Diagrams How to Assemble the Bradley Smoker® • Fill the Drip Bowl (D) half full of water and place in the center of the Rectangular Tray to catch burnt Bisquettes.
Original Bradley Smoker® External Components List 7 on top 13 2 9 4 8 16 3 1 5 14 6 12 11 3 10 15 External Parts List 1. Smoke Generator 2. Smoker Tower 3. Generator Supports 4. Feeder Tube 5. Smoke Generator Indicator Light 6. Bisquette Advance Button 7. Damper with handle (not shown) 8. Door 9. Thermometer 10. Temperature Heat Control Switch 11. Heat Indicator 12. Generator On/Off Switch 13. Door Seal 14. Lower Face Plate 15. Rubber Feet 16.
Original Bradley Smoker® Internal Components List C H B E L G A D K I F J M Internal Parts List A) Long Power Cord B) Drip Tray C) Cooking Racks D) Drip Bowl E) Short Jumper Cord (not shown) Connects Generator F) Bisquette Burner G) 500 Watt Heating Element H) Flavor Bisquettes® (not included) I) Drive Guide J) Bottom Rectangular Tray K) Door Hinge L) Porcelain Holder M) Temperature Heat Control Switch 7
OPERATION GUIDELINES Refer to part numbers in the External Components List Diagram Seasoning & Preparation For Use Getting Started •After seasoning the smoker, refill the Drip Bowl half full of water. • Turn on the Smoke Generator by pressing the Generator On/Off switch (12). • When the Smoker Generator indicator light (5) is on, this means the Generator has power. • Press the bisquette advance button (6) to push a Bisquette onto the Bisquette burner (F).
Assembly Instructions 4 Rack Digital Smoker (Model: BTDS76P; BTDS76CE-EU) 6 Rack Digital Smokers (Model: BTDS108P; BTDS108CE-EU) For Original Black Smoker and Stainless Steel Smoker Assembly Instructions See Page 5 Refer to Part Numbers in External Components List, Internal Components List and Electrical Connection Set Up How to Assemble the Bradley Digital Smoker® Set Up Smoker Tower: • Place Racks, either four or six (B) onto side supports.
Bradley Digital Smoker® External Components List Exterior Parts List 1. Digital Smoke Generator 2. Smoke Tower 3. Generator Supports (not shown) 4. Feeder Tube 5. Digital Display Panel (see page 13) 6. Damper 7. Door 8. Door Seal 9. Rubber Feet 10.
Bradley Digital Smoker® Internal Components List G B I A J F D E C K Internal Parts List A) Drip Tray B) Cooking Racks (4 or 6) C) Drip Bowl D) Bottom Rectangular Tray E) Bisquette Burner (Bisquettes not included) F) Heating Element G) Top Door Hinge H) Lower Door Hinge I) Brass Pin J) Porcelain Insulator K) Drive Guide 11 H
1. First plug sensor cable (1) into the back of generator (A) and smoker (B). 2. Plug short jumper cord (2) into the receptacles in the smoker (C) and generator (D). 3. Plug the long power cord (3) into the power receptacle in generator (E). 4. Lastly plug the long power cord (3) into wall outlet (4). (Extension cords should be for outdoor use and the connection to the extension cord should be dry and off the ground.) 1. Sensor Cable 2. Short Jumper Cord 3. Long Power Cord 4. Wall Outlet A.
Display Function Guideline Digital Smoke Generator • • • • • • Smoke Generator operated by left side control buttons. Press “On/Off Smoker” to turn Smoke Generator on. Press “>>> Wood” to advance Bisquettes onto Burner. Press “Smoker Timer Set” and then “v ^” to desired length of smoking time. Press “Smoker Timer Set” again to start 20 minute automatic advance. Press “On/Off Smoker” to turn Smoke Generator off. Smoker Oven • Smoker Oven operated by right side control buttons.
Operation Guideline Seasoning & Preparation For Use • Seasoning the Bradley Digital Smoker is an ongoing process, the more you use it, the better tasting the foods will be. • The Seasoning Process is mainly to remove the impartial smells and flavors from your smoker. The smell of your new Bradley Digital Smoker is not necessarily how you want your food to taste. Seasoning Method • Clean Racks, Drip Tray, Drip Bowl and Rectangular Tray and place in smoker. • Fill the Drip Bowl half full of water.