Specification Sheet
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for this
service from Bradley.
Page 1 of 2 4/14/2011
This information is subject to change without notice.
Bradley_CombiDispenser_2277_10_11
2277
Towel Dispenser/Waste Receptacle
Model 2277 — Recessed Bradex
®
Model 2277-10 — Semi-Recessed
(recesses 3½"; projects 7")
Model 2277-11 — Surface-Mounted
(projects 10½")
Contemporary Series — Satin Finish
Product Materials
CABINET: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. Welded construction with seamless corners and burr-free edges.
DOOR: 18 gauge stainless steel. ½" return for maximum rigidity. Concealed
full length stainless steel piano hinge and 2 tumbler locks keyed like other
Bradley units.
TOWEL DISPENSER: furnished (manufactured by others). Rolled edge on
dispenser opening.
WASTE RECEPTACLE INSERT: leakproof molded plastic.
Capacity
Towel Dispenser — one standard core 8" or 9"W x 800'L roll paper towel
Waste Receptacle Insert — 10.5 gal. (1.4 cu. ft.)
Operation
Towel dispenser delivers preset length of towel (2½", 4" or 5" per stroke).
Waste receptacle insert removable by unlocking cabinet door. Operates with
less than 5 lbs. of force.
Installation
Verify all rough-in dimensions prior to installation. Recessed unit requires
rough wall opening 15¾"W x 39½"H x 10¼"D (Semi-recessed unit only 3½"
deep). Secure to framing with mounting screws (included) at holes provided.
Shim at screw points as required. Surface-mounted units must have holes
drilled by installer.
Guide Specification
Recessed combination towel dispenser and waste receptacle shall be
fabricated of heavy gauge stainless steel with exposed surfaces in satin
finish. Cabinet door of 18 gauge stainless steel with full length concealed
piano hinge and secured by 2 tumbler locks. Towel dispenser shall be
activated with less than 5 lbs. of force and have the capacity to hold one
standard core 8" or 9"W x 800'L roll paper towel. Removable 10.5 gal.
leakproof molded plastic insert for waste receptacle.
Overall dimensions: 17
3
⁄8"W x 41¼"H x 10½"D.
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.