Specification Sheet

ManualsBrandsBradley Manualspaper towel dispensersBradley Bradex Recessed Paper Towel Dispenser and Waste Receptacle

235

Towel Dispenser/Waste Receptacle

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex

will be available to ship in three days after receipt of

order at the factory. There is no pricing penalty for

this service from Bradley.

Page 1 of 3 7/9/2012

This information is subject to change without notice.

Bradley_CombiDispenser_235_10_11

Model 235 — Recessed Bradex

Model 235-10 — Semi-Recessed

(recesses 1-31/32"; projects 2-3/32")

Model 235-11 — Surface-Mounted

(projects 4-1/16")

Standard Series — Satin Finish

Product Materials

CABINET: 24 gauge steel. Welded construction with seamless cor ners and

burr-free edges.

FLANGE: 22 gauge stainless steel with exposed surfaces in ar chi tec tur al

satin finish. One piece seamless con struc tion, 1" wide radiused corners with

1/4" return.

DOORS: 18 gauge stainless steel. Warp resistant, with full length piano

hinge and tumbler lock keyed like other Bradley units.

TOWEL DISPENSER: 22 gauge stainless steel. Rolled edge on dispenser

opening.

WASTE CONTAINER INSERT: leakproof molded plastic.

Capacity

Towel Dispenser — 800 multi-fold or 500 C-fold paper towels

Waste Receptacle Insert — 4.9 gal. (0.65 cu. ft.)

Operation

Towel dispenser holds multi-fold or C-fold towels without use of special

adap tor. Waste receptacle insert removable for easy servicing by unlocking

waste container.

Installation

Verify all rough-in dimensions prior to installation. Recessed unit requires

rough wall opening 15-3/4"W x 54-5/8"H x 4"D (Semi-recessed unit only 2"

deep). Secure to framing with mounting screws (included) at holes provided.

Shim at screw points as required. Surface-mounted units must have holes

drilled by installer.

Guide Specification

Recessed com bi na tion tow el dis pens er and waste re cep ta cle shall be fabri cat ed

of 22 gauge stain less steel with ex posed sur fac es in sat in finish. Cab i net doors

of warp-free con struc tion, equipped with full length pi ano hinge and secured

by tumbler lock. Towel dispenser capacity 800 multi-fold or 500 C-fold towels.

Re mov able 4.9 gal. leakproof molded plastic insert for waste receptacle.

Overall dimensions: 17-1/8"W x 56"H x 4-1/16"D.

ADA Compliant

Consult local and national accessibility codes for proper installation

guidelines.

Conformity and compliance to local and national codes is the responsibility

of the installer.

Summary of content (3 pages)

PAGE 1
235 Towel Dispenser/Waste Receptacle  Model 235— Recessed Bradex®  Model 235-10 — Semi-Recessed (recesses 1-31/32"; projects 2-3/32")  Model 235-11 — Surface-Mounted (projects 4-1/16") Standard Series — Satin Finish Product Materials CABINET: 24 gauge steel. Welded construction with seamless corners and burr-free edges. FLANGE: 22 gauge stainless steel with exposed surfaces in architectural satin finish. One piece seamless construction, 1" wide radiused corners with 1/4" return.
PAGE 2
35 Towel Dispenser/Waste Receptacle Dimensions for Model 235 (mm) 15-1/4" (387) 4-1/16" (103) 4-1/4" (108) 18-1/32" (458) Dim. "A" to finished floor 54-5/32" (1376) 56" (1422) 24-1/16" (611) 7-9/32" (185) 3-13-16" (97) 17-1/8" (435) Dim. "A" Key Surface: Paper towel top of opening to finished floor For Dim.
PAGE 3
235 Towel Dispenser/Waste Receptacle Dimensions for Models 235-10 and 235-11 (mm) 15-1/4" (387) 4-1/16" (103) Model 235-10 Model 235-11 4-1/4" (108) 18-1/32" (458) 54-5/32" (1376) Dim. "A" to finished floor 56-1/4" (1429) 24-1/16" (611) 7-9/32" (185) 1-31/32" (50) 2-3/32" (53) 17-3/8" (441) Dim. "A" Key Surface: Paper towel top of opening to finished floor 4-3/32" (104) 3-27/32" (98) For Dim.