Installation Sheet

2494 Transfer Instructions

1) When the roll of paper is at 3" Dia. Or smaller, it is 2) Carefully remove the stub roll, making sure the

time to replace it with a new roll. paper web is under the transfer bar.

3) Insert stub roll into "stub roll holders" in the bottom of the 4) Install a new roll with the web coming off the back.

dispenser. Place tail of paper under transfer bar.

5) Do not tuck transfer bar into paper, allow transfer bar 6) Close cover and resume dispensing. The new

to rest on web of new roll. paper will transfer automatically when stub roll

is used up.

TransferBar

Stub roll holders

PAGE 1
2494 Transfer Instructions TransferBar 1) When the roll of paper is at 3" Dia. Or smaller, it is time to replace it with a new roll. 2) Carefully remove the stub roll, making sure the paper web is under the transfer bar. Stub roll holders 3) Insert stub roll into "stub roll holders" in the bottom of the dispenser. 4) Install a new roll with the web coming off the back. Place tail of paper under transfer bar. 5) Do not tuck transfer bar into paper, allow transfer bar to rest on web of new roll.