Specification Sheet

251-15
Towel Dispenser
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 1 4/1/2010
This information is subject to change without notice.
Bradley_Dispenser_251-15
 Model 251-15 — Surface-Mounted
Brad
ex
®
Single-Fold Towels
Tumbler Lock
Product Materials
UNIT: 22 gauge stainless steel with exposed surfaces in architectural satin
finish. Smooth corners, free of burrs and sharp edges. Tumbler lock keyed
like other Bradley units. Front of cabinet hinged at bottom to allow easy
filling. Refill indicator slot on both sides and front of cabinet. Rolled edge on
dispenser opening.
Capacity
400 single-fold paper towels.
Operation
Unit holds single-fold towels without use of special adapter.
Installation
Verify all rough-in dimensions prior to installation. Secure to wall with
mounting screws (not included) at holes provided. Mounting kit (#899-027)
available through Bradley. Visit bradleycorp.com for more information.
Provide in-wall backing at mounting screw locations.
Guide Specification
Surface-mounted towel dispenser shall be fabricated of 22 gauge stainless
steel with exposed surfaces in satin finish. Refill indicator on both sides and
front of cabinet. Tumbler lock to secure hinged cabinet. Towel dispenser
capacity 400 single-fold towels.
Overall dimensions: 11"W x 8-1/8"H x 6-1/16"D.
11”
(280 mm)
6-1/16”
(154 mm)
8-1/8”
(206 mm)
7-9/16”
(192 mm)
2-11/16”
(68 mm)
1-1/2”
(38 mm)
4 MOUNTING HOLES
8”
(203 mm)
DISPENSING LIP
4”
(102 mm)
Refill Indicator
NOTE: Refill Indicator on all three sides.
Refill Indicator