Specification Sheet

4721-15
Napkin Disposal
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 5/2/2012
This information is subject to change without notice.
Bradley_Vendor_4721-15
 Model 4721-15 — Partition-Mounted
Bradex
®
Standard Series — Satin Finish
Serves Two Compartments
Product Materials
FLANGE: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. One-piece seamless construction, 1" wide with ¼" return.
CABINET: 22 gauge stainless steel. All welded construction with one flange
welded to cabinet.
PUSH FLAP DOOR fabricated of 22 gauge stainless steel with exposed
surfaces in architectural satin finish. Heavy-duty stainless steel piano hinge.
Self-closing flap door.
WASTE CONTAINER fabricated of 22 gauge stainless steel with tumbler
locks keyed like other Bradley units.
Capacity
1.5 gal (0.2 cu. ft.)
Operation
Waste container removable from one side with finger grip. Furnished with
waxed paper liner. Box of 500 waxed paper liners are available by ordering
part number P11-022.
Installation
Verify all rough-in dimensions prior to installation. Requires partition opening
11"W x 15
3
⁄8"H. Location of hole and dimensions should be noted in partition
specifications. Flange adjustable for partitions from ½" to 1¼" thick. Secure
unit to partition with mounting screws (included) at holes provided.
If used with an odd number of toilet compartments, use one Bradley Model
4722-15 napkin disposal on side wall of end compartment.
Guide Specification
Partition-mounted dual napkin disposal shall serve two toilet com part-
ments and be fabricated of 22 gauge stainless steel with exposed surfaces in
satin finish and burr-free beveled edges. Two self-closing push flap doors.
Stainless steel receptacle with tumbler locks, removable from one side only.
Overall dimensions: 12¾"W x 17
1
⁄8"H x 4"D.
ADA Compliant
Consult local and national accessibility codes for
proper installation guidelines.
Conformity and compliance to local and national
codes is the responsibility of the installer.