Installation Guide

4722-15
Napkin Disposal
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 6/6/2013
This information is subject to change without notice.
Bradley_WasteReceptacle_4722-15
 Model 4722-15 — Surface-Mounted
Brad
ex
®
Standard Series — Satin Finish
Single End Compartment
Product Materials
CABINET: 22 gauge stainless steel with exposed surfaces in
architectural satin finish. All welded construction.
PUSH FLAP DOOR: 22 gauge stainless steel with exposed surfaces
in architectural satin finish. Heavy-duty stainless steel piano hinge.
Self-closing flap door.
WASTE CONTAINER: 22 gauge stainless steel with tumbler locks
keyed like other Bradley units.
Capacity
1.5 gal (0.2 cu. ft.)
Operation
Waste container removable from one side with finger grip. Furnished
with waxed paper liner. Box of 500 waxed paper liners are available by
ordering part number P11-022.
Installation
Verify all rough-in dimensions prior to installation. Secure unit to wall
with mounting screws (included) at holes provided.
Guide Specification
Surface-mounted napkin disposal shall serve one toilet compartment
and be fab ri cat ed of 22 gauge stainless steel with exposed surfaces in
satin finish. Self-closing push flap door and stainless steel removable
receptacle with tumbler lock.
Overall dimensions: 10¾"W x 15
1
⁄8"H x 4"D.
ADA Compliant
Consult local and national accessibility codes for
proper installation guidelines.
Conformity and compliance to local and national
codes is the responsibility of the installer.