Specification Sheet

ManualsBrandsBradley ManualsSanitary NapkinBradley Bradex Surface-Mounted Sanitary Napkin Disposal

4A10

Sanitary Product Disposal Unit

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex

will be available to ship in three days after receipt of

order at the factory. There is no pricing penalty for

this service from Bradley.

Page 1 of 2 4/8/2013

This information is subject to change without notice.

Bradley_SanitaryProductDisposal_4A10

 Model 4A10-11 — Surface-Mounted

Brad

Diplomat Series

Product Materials

COVER: 0.030-inch/22ga.-(0.76 mm) stainless steel with exposed surfaces

in architectural satin finish. Heavy-duty stainless steel piano hinge.

CONTAINER: 0.030-inch/22ga.-(0.76 mm) stainless steel with exposed

surfaces in architectural satin finish. All welded construction with front

curvature matching other Bradley Diplomat washroom accessories.

Operation

Lid opens for removal of waste. Box of 500 waxed paper liners are available

by ordering part number P11-022.

Installation

Surface mounted units must have holes drilled by installer. Secure unit to

wall or partition with mounting screws (not included). Shim at screw points

as required.

Guide Specification

Surface-mounted napkin/tampon disposal unit, with face formed with

contemporary contours, radii, and finish matching related accessories in

manufacturer's designer series. Capacity 1.5 gal (0.2 cu. ft.). Equipped with

hinged cover; accepts owner’s disposable liners. Formed from stainless

steel sheet with satin finish on exposed surfaces, fully welded, with seamless

corners and burr-free edges: cabinet and waste container 0.030-inch / 22-ga.

thick; door 0.036-inch / 20-ga. thick.

Overall dimensions: 8"W x 10¹⁄₁₆"H x 3⁷⁄₈"D.

For information on Warranties, Maintenance and BAA/ARRA

Compliance, visit our web site at:

bradleycorp.com/products/accessories/.

ADA Compliant

Consult local and national accessibility codes for proper

installation guidelines.

Conformity and compliance to local and national codes is

the responsibility of the installer.

MasterFormat Title: Commercial Toilet Accessories

MasterFormat Number: 10 28 13.13

OmniClass Title: Toilet and Bath Specialties

OmniClass Code: 23.31.25.00

Summary of content (2 pages)

PAGE 1
4A10 Sanitary Product Disposal Unit M odel 4A10-11 — Surface-Mounted Bradex® Diplomat Series Product Materials OVER: 0.030-inch/22ga.-(0.76 mm) stainless steel with exposed surfaces C in architectural satin finish. Heavy-duty stainless steel piano hinge. CONTAINER: 0.030-inch/22ga.-(0.76 mm) stainless steel with exposed surfaces in architectural satin finish. All welded construction with front curvature matching other Bradley Diplomat washroom accessories. Operation Lid opens for removal of waste.
PAGE 2
4A10 Sanitary Product Disposal Unit Dimensions 37⁄8" (98 mm) (2) MOUNTING HOLES 8” (203 mm) 101⁄16" (256 mm) Dim. "A" to finished floor Dim. "A" Key Surface: Waste receptacle top lip to finished floor Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley. Page 2 of 2 4/8/2013 This information is subject to change without notice.