Specification Sheet

508
Toilet Tissue Dispenser
© 2017 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 1 3/3/2017
This information is subject to change without notice.
Bradley_TPDispenser_508
3¼"
(83mm)
2⁵⁄₈"
(67mm)
7½"
(191mm)
1¾"
(44mm)
5³⁄₈"
(137mm)
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.
Model 508 Bradex
®
Non-Controlled Delivery
Single Roll
Product Materials
UNIT: chrome-plated cast brass.
SPINDLE: chrome-plated plastic.
Capacity
One standard core toilet tissue roll through 5½" in diameter.
Operation
Concealed spring permits spindle to telescope for servicing.
Spindle turns freely for non-controlled delivery.
Installation
Verify all rough-in dimensions prior to installation. Secure
concealed wall mounting brackets to wall with screws (in clud ed) at
holes provided. Slide escutcheons and posts over projecting pins
on mounting brackets and secure with concealed set screw.
Optional Features
Guide Specification
Surface-mounted single roll toilet tissue dispenser shall be
chrome-plated cast brass and hold one standard core toilet tissue
roll.
Overall dimensions: 7½"W x 1¾"H x 3¼"D.
Feature Suffix
 Anti-theft spindle
-52
Dim. "A" Key Surface: For Dim. "A" Top of Unit Bottom of Unit
Centerline of spindle to
finished floor (bottom
edge of paper roll 3"
below centerline of
spindle)
23" (584mm) 23¾" (603mm) 22" (559mm)
22" (559mm) 22¾" (578mm) 21" (533mm)
21" (533mm) 21¾" (552mm) 20" (508mm)
20" (508mm) 20¾" (527mm) 19" (483mm)
19" (483mm) 19¾" (502mm) 18" (457mm)
18" (457mm) 18¾" (476mm) 17" (432mm)
Rough wall opening:
Surface Mount: No rough opening, see overall dimensions
Dim. "A" to
finished floor