Specification Sheet

5084, 5085
Toilet Tissue Dispenser
© 2016 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 1 2/25/2016
This information is subject to change without notice.
Bradley_TPDispenser_5084_5085
Model 5084 — Satin Stainless Steel Bradex
®
 Model 5085 — Bright Polish Bradex
®
Non-Controlled Delivery
Single Roll (For Dual Roll see Models 5234 and 5235)
Product Materials
POSTS: 22 gauge stainless steel with exposed surfaces in architectural satin finish
(Model 5084) or bright polish finish (Model 5085).
ESCUTCHEONS: heavy stainless steel with exposed surfaces in architectural satin
finish (Model 5084) or bright polish finish (Model 5085).
SPINDLE: chrome-plated plastic.
MOUNTING BRACKET: 18 gauge stainless steel.
Capacity
One standard core toilet tissue roll through 5½" in diameter.
Operation
Concealed spring permits spindle to telescope for servicing. Spindle turns freely for
non-controlled delivery.
Installation
Verify all rough-in dimensions prior to installation. Secure concealed wall mounting
brackets to wall with screws (in clud ed) at holes provided. Mount projecting
arms and escutcheons to bracket and secure with concealed locking screw. Snap
escutcheons into place.
Guide Specification
Model 5084: Surface-mounted single roll toilet tissue dispenser shall be heavy
gauge stainless steel with satin finish and hold one standard core toilet tissue roll.
Model 5085: Surface-mounted single roll toilet tissue dispenser shall be heavy
gauge stainless steel with bright polish finish and hold one standard core toilet
tissue roll.
Overall dimensions: 7¾"W x 2"H x 3
5
⁄8"D.
Optional Features
7¾"
(197mm)
3⁷⁄₈"
(99mm)
2"
(51mm)
2"
(51mm)
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.
Feature Suffix
 Anti-theft spindle
-52
 Domestic 5084
-US
Dim. "A" to
finished floor
Dim. "A" Key Surface: For Dim. "A" Top of Unit Bottom of Unit
Centerline of spindle to
finished floor (bottom
edge of paper roll 3"
below centerline of
spindle)
23" (584mm) 24" (610mm) 22" (559mm)
22" (559mm) 23" (584mm) 21" (533mm)
21" (533mm) 22" (559mm) 20" (508mm)
20" (508mm) 21" (533mm) 19" (483mm)
19" (483mm) 20" (508mm) 18" (457mm)
18" (457mm) 19" (483mm) 17" (432mm)
Rough wall opening:
Surface Mount: No rough opening, see overall dimensions
Dimensions on US models
may differ slightly from
standard models, however
this will not affect installation.