Specification Sheet

5412
Toilet Tissue Dispenser
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 7/26/2011
This information is subject to change without notice.
Bradley_TPDispenser_5412
Model 5412 — Recessed Bradex
®
Dual Roll
ADA Compliant
Product Materials
FLANGE: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. Flange of one-piece seamless construction, 1" wide with ¼"
return.
CABINET: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. Welded construction with burr-free edges
SERVICE DOOR: 22 gauge stainless steel with exposed surfaces in
architectural satin finish and tumbler lock keyed like other Bradley units.
Hinged at bottom.
SPINDLES: molded polyethylene.
Capacity
Two standard core toilet tissue rolls through 5" in diameter.
Operation
Cabinet holds two rolls of 4½" x 5" standard core toilet tissue, one above
the other. When first roll is used up, fresh roll automatically drops down for
use. Unique retaining mechanism prevents use of spare roll until first roll
is completely used. Spindles non-removable by user. Hinged door permits
access to storage compartment for ser vic ing of unit.
Installation
Verify all rough-in dimensions prior to installation. Requires rough wall
opening 5
7
⁄8"W x 10
5
⁄8"H x 4"D. Secure to framing with mounting screws (not
included) at holes provided. Mounting Kit #899-027 available from Bradley.
Visit bradleycorp.com for more information. Shim at screw points as re quired.
Guide Specification
Recessed dual roll toilet tissue dispenser shall be heavy gauge satin finish
stainless steel and hold two standard core toilet tissue rolls.
Overall dimensions: 5
5
⁄8"W x 10
3
⁄8"H x 5
5
⁄16"D
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.