Specification Sheet

5422
Toilet Tissue Dispenser
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 8/21/2013
This information is subject to change without notice.
Bradley_TPDispenser_5422
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.
Model 5422 — Partition Mounted Bradex
®
Partition-Mounted
Serves Two Compartments
ADA Compliant
Dual Roll
Product Materials
FLANGE: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. Flange of one-piece seamless construction, 1" wide with ¼"
return.
CABINET: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. Welded construction with burr-free edges
SERVICE DOOR: 22 gauge stainless steel with exposed surfaces in
architectural satin finish and tumbler lock keyed like other Bradley units.
Hinged at bottom.
SPINDLES: molded polyethylene.
Capacity
Two dispensers; one per compartment. Each holds two standard core toilet
tissue rolls through 5" in diameter.
Operation
Each cabinet holds two rolls of 4½" x 5" standard core toilet tissue, one
above the other. When first roll is used-up, fresh roll automatically drops
down for use. Unique retaining mechanism prevents use of spare roll until
first roll is completely used. Spindles non-removable by user. Hinged door
permits access to storage compartment for ser vic ing of unit. Serves two toilet
compartments, dispensing one roll to each side of partition, while holding a
second roll in reserve.
Installation
Verify all rough-in dimensions prior to installation. Requires partition opening
10
5
⁄8"H x 11
3
⁄8"W. Flanges adjustable for partitions from ½" to 2" thick.
Remove one flange and install cabinet in partition opening. Draw flange tight
to partition and secure with screws. Replace flange on opposite side, draw
tight to partition, and secure with screws.
Guide Specification
Partition-mounted dual roll toilet tissue dispenser shall be satin finish
stainless steel and hold four standard core toilet tissue rolls-two in reserve for
use after first rolls are exhausted.
Overall dimensions: 13"W x 12
3
⁄8"H x 6¼"D.