Specification Sheet

5425
Toilet Tissue Dispenser
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 1 7/2/2014
This information is subject to change without notice.
Bradley_TPDispenser_5425
Model 5425 — Surface-Mounted Bradex
®
Jumbo Roll
Product Materials
CABINET & MOUNTING PLATE: 18 gauge satin finish stainless steel.
DOOR: 18 gauge satin finish stainless steel. Drawn one-piece construction.
Furnished with tumbler lock and refill-indicator viewing slots.
DISPENSING MECHANISM: chemical- and flame-retardant ABS.
Operation
Cabinet holds two 9" diameter rolls of 3" or 2¼" diameter core toilet tissue (by
using core adapters). When first roll is depleted, the bottom access panel level is
slid to the other side, revealing the second roll. Refill indicator slot reveals tissue
level. Tumbler-locked door swings down to replenish tissue rolls.
Installation
Verify all rough-in dimensions prior to installation. Secure unit to wall or toilet
partition with five screws (included) through mounting holes.
Guide Specification
Jumbo roll toilet tissue dispenser shall be 18-gauge satin finish stainless steel.
Dispensing mechanism shall be flame and chemical retardant ABS plastic. Unit
shall dispense two 9" diameter toilet tissue rolls with 3" or 2¼" diameter core. Unit
shall have a sliding access panel to allow dispensing from one roll at a time. Door
shall be secured with a tumbler lock and shall have a refill indicator viewing slot.
Overall dimensions: 20
⁹⁄₁₆"W x 11³⁄₈"H x 4⁷⁄₁₀"D.
12¼"
(311mm)
Viewing slot
20⁹⁄₁₆"
(522mm)
7½"
(191mm)
4⁷⁄₁₀"
(119mm)
4⁷⁄₁₆"
(113mm)
Ty p.
5¹³⁄₁₆"
(148mm)
⁷⁄₁₆" (11mm)
Ty p.
11³⁄₈"
(289mm)
Sliding
mechanism
Lock & key
Door
Cabinet
Finished wall
1¹⁄₈"
(29mm)
Dim. "A" Key Surface:
For Dim. "A" Top of Unit Bottom of Unit
Bottom of toilet paper
opening to finished floor
20" (508mm)
31⁵⁄₁₆" (796mm)
20" (508mm)
19" (483mm)
30⁵⁄₁₆" (770mm)
19" (483mm)
18" (457mm)
29⁵⁄₁₆" (745mm)
18" (457mm)
17" (432mm)
28⁵⁄₁₆" (720mm)
17" (432mm)
16" (406mm)
27⁵⁄₁₆" (694mm)
16" (406mm)
15" (381mm)
26⁵⁄₁₆" (669mm)
15" (381mm)
Rough wall opening:
Surface Mount:
No rough wall opening, see overall dimensions
Dim. "A"
to finished
floor
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.