Specification Sheet

583
Seat Cover Dispenser
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 1 1/20/2011
This information is subject to change without notice.
Bradley_SeatCoverDispenser_583
ADA Compliant
Consult local and national accessibility codes for
proper installation guidelines.
Conformity and compliance to local and national
codes is the responsibility of the installer.
Model 583 — Surface-Mounted Bradex
®
500 Capacity
Product Materials
COVER: 22 gauge stainless steel with exposed surfaces in architectural satin
finish. Welded construction with burr-free edges, full length piano hinge and
tumbler lock keyed like other Bradley units.
BACK: stainless steel.
Capacity
500 standard single-fold or half-fold toilet seat covers.
Operation
Cabinet bottom hinged for easy filling. Unit has spring
clip dis pens ing mechanism.
Installation
Verify all rough-in dimensions prior to installation.
Secure unit to wall or toilet partition with mounting
screws (included) through mounting holes.
Guide Specification
Surface-mounted toilet seat cover dispenser shall be
fabricated of 22-gauge stainless steel with exposed
surfaces in satin finish with welded construction. Door
with piano hinge and tumbler lock. Capacity 500 toilet
seat covers.
Overall dimensions: 15"W x 11½"H x 2
3
⁄8"D.
Dim. "A" Key Surface:
For Dim. "A" Top of Unit Bottom of Unit
Top of seat cover
opening to finished floor
48" (1219mm) 50" (1270mm)
38⁵⁄₈ (981mm)
45" (1143mm) 47" (1194mm)
35⁵⁄₈" (904mm)
42" (1067mm) 44" (1118mm)
32⁵⁄₈" (828mm)
40" (1016mm) 42" (1067mm)
30⁵⁄₈" (777mm)
Rough wall opening:
Surface Mount: No rough opening, see overall dimensions
2³⁄₈"
(60mm)
5¼"
(133mm)
3¹⁄₈"
(79mm)
6"
(152mm)
4³⁄₈"
(111mm)
Dim. "A"
to finished
floor
15"
(381mm)
11½"
(292mm)