Specification Sheet
5922
Combination Unit
© 2017 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 12/7/2017
This information is subject to change without notice.
Bradley_CombiDispenser_5922_10_11
ADA Compliant
Consult local and national accessibility codes for proper installation
guidelines.
Conformity and compliance to local and national codes is the responsibility of
the installer.
Note: ADA requires a 1½" grab bar clearance to the wall. When fully recessed, this
unit protrudes ¼" from the finished wall. A standard grab bar, when mounted
over the unit, will not meet the ADA requirement of 1½".
Model 5922 — Recessed Bradex
®
Model 5922-10 — Semi-Recessed
(recesses 3¼", projects 1¼")
Model 5922-11 — Surface-Mounted
(projects 4½")
Models 5922-10 and 5922-11 do not allow clearance
for optional grab bar. See inset view shown at right.
Seat Cover Dispenser/Dual Roll Tissue Dispenser
Product Materials
CABINET: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. Welded construction with burr-free edges.
FLANGE: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. One-piece seamless construction, 1" wide with ¼" return.
DOOR: 18 gauge stainless steel with full-length piano hinge and tumbler
lock keyed like other Bradley units.
SPINDLES: polyethylene, non-removable by user.
Capacity
Toilet Seat Cover Dispensers — 1,000 standard single-fold or half-fold
toilet seat covers; Toilet Tissue Dispensers — two standard core toilet
tissue rolls through 5¼" in diameter.
Operation
Hinged access door permits servicing of components from one side.
Installation
Verify all rough-in dimensions prior to installation. Requires rough wall
opening 15
3
⁄8"W x 28
7
⁄8"H x 4¼"D. Secure to framing with mount ing
screws (in clud ed) at holes provided. Recessed unit allows clearance for
grab bar (not included) across front of unit. Semi-recessed and surface-
mounted units utilize one piece door; does not allow clearance for grab
bar. 5900 Series Combination Units are to be installed so that doors open 90°
to fill product and maintain waste container.
Guide Specification
Recessed combination unit shall include toilet seat cover dispenser and
toilet tissue dispenser, and be fabricated of stainless steel with seamless
exposed sur fac es in satin finish. Door and back panel shall be 18 gauge.
Door shall have piano hinge and tumbler lock.
Overall dimensions: 17
1
⁄8"W x 30
5
⁄8"H x 4½"D.