Specification Sheet

6315
Sensor-Operated Soap Dispenser
© 2017 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 4/6/2017
This information is subject to change without notice.
Bradley_SoapDispenser_6315
Reliable Battery Infrared Metering Activation
LED Light Indicators for Low Battery & Low Soap Refill
5½" Spout
ADA Compliant
Model 6315-KT0000 Starter Kit — Bradex
®
Includes Model 6315 Soap Dispenser, One Bottle of
Soap (1000-shot) and Four Alkaline “D”-cell Batteries.
Model 6315 Soap Dispenser (only) — Bradex
®
Soap bottle not included. Must be ordered separately.
Product Materials
SPOUT ASSEMBLY: chrome-plated plastic. Has LED light indicators: Yellow
flashing light = low battery. Red flashing light = low soap.
MOTOR ASSEMBLY: plastic. Soap cartridge size is set for 1000-shot (27-oz.)
bottle. If using 2000-shot (54-oz.) bottle, move switch located under rubber
plug (by red reset button) to 2K. Once soap cartridge is installed, press refill
reset button (red). This will automatically prime the soap refill bottle and initiate
counting mechanism.
BATTERY BOX: plastic, holds 4 “D”-cell alkaline batteries included with Starter
Kit 6315-KT0000.
Operation
Place hands under soap spout and hold for approximately two seconds. Spout
will dispense lotion soap with moisturizer.
Soap Refills
Bradley offers lotion soap with moisturizer. 1000-shot bottle (P19-232B) or
2000-shot bottle (P19-232A) in case quantity only (4 bottles per case). Soap has
a two-year shelf life. Date on bottom of bottle is expiration date. Bottles are
not refillable.
Installation
Verify all rough-in dimensions prior to installation. Mount dispenser in 1"
diameter hole in lavatory or countertop 1½" from edge of sink. Shank will
accommodate a maximum counter thickness of 2". Place (4) “D”-cell alkaline
batteries (included in Starter Kit) into battery box. Plug battery box into motor
assembly. Remove white clip from bottom of spout assembly. Insert soap bottle
supply tube through spout assembly. Twist and lock soap bottle onto bottom of
spout assembly. Attach white clip to bottom of spout assembly and top of soap
bottle. Press and release reset (red) button located on spout assembly.
Guide Specification
Sensor-operated soap dispenser spout assembly shall be fabricated of chrome-
plated plastic and have LED indicators for low soap and low battery. Soap
dispenser shall be able to dispense 0.027-oz. of lotion soap with moisturizer.
SOAP BOTTLE REFILL DIMENSIONS
Capacity A B
27 oz.
1000 shots
9"
(299 mm)
3¼"
(83 mm)
54 oz.
2000 shots
10½"
(267 mm)
4
1
⁄16"
(103 mm)
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.
4" (102mm)
3
1
⁄8"
(79mm)
5½"
(140mm)
2" (51mm)
1
5
⁄8"
(41mm)
5
5
⁄8"
(143mm)
6
9
⁄16"
(167mm)
Soap Size
Setting
Reset Button
Soap Bottle
(included in
Starter Kit)
"A"
"B"
Requires (4) "D" Cell
Batteries (included
in Starter Kit)