Specification Sheet

646
Soap Dispenser
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 1 2/28/2011
This information is subject to change without notice.
Bradley_SoapDispenser_646
Standard Series — Satin Finish
Recessed
ADA Compliant
Product Materials
FRONT PANEL/ FLANGE: 22 gauge stainless steel with exposed surfaces
in architectural satin finish. One-piece seamless construction,
5
⁄8" wide with
¼" return.
CABINET: 22 gauge stainless steel.
SOAP VESSEL: 22 gauge stainless steel with exposed surfaces in
architectural satin finish. Tumbler lock keyed like other Bradley units.
SOAP VESSEL LINER: low density polyethylene.
SOAP VALVE: chrome-plated brass with ABS mechanism. Requires less
than 5 lbs. of force to dispense soap.
Capacity
40-oz. liquid soap.
Operation
Soap dispenser swings open for filling and cleaning. Sight gauge indicates
refill time. Valve dispenses measured amount of liquid soap. Requires less
than 5 lbs. of force to dispense soap.
Bradley liquid soap valves operate best with any vegetable oil or coconut
oil hand soap having a 10−15% soap concentration.
Installation
Verify all rough-in dimensions prior to installation. Requires rough wall
opening 6
7
⁄8"W x 11¾"H x 4"D. Secure to framing with mounting screws
(included) at holes provided. Shim at screw points as required.
Guide Specification
Recessed liquid soap dispenser shall be fabricated of 22 gauge stainless
steel with exposed surfaces in satin finish. Requires less than 5 lbs. force to
dispense soap. Capacity: 40-oz. liquid soap.
Overall dimensions: 7¾"W x 12
5
⁄8"H x 4
1
⁄16"D.
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.
7.72"
(196mm)
4.06"
(103mm)
6.61"
(168mm)
12.63"
321mm)
1.00"
(25mm)
2.35"
(60mm)
.25"
(6mm)
2.44"
(62mm)
2.20"
(56mm)
1.00"
(25mm)
2.20"
(56mm)
11.52"
(293mm)