Specification Sheet

655
Soap Dispenser
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 2 2/28/2011
This information is subject to change without notice.
Bradley_SoapDispenser_655
Tank-Type Vertical Valve
Surface-Mounted
ADA Compliant
Product Materials
BODY: 20 gauge stainless steel with exposed surfaces in
architectural satin finish.
BACK: 20 gauge stainless steel; welded to the body.
WALL PLATE: stainless steel.
SOAP VALVE: chrome-plated brass housing with ABS plastic
and stainless steel mechanism. Requires less than 5 lbs. force to
dispense soap.
Capacity
40-oz. liquid soap.
Operation
Push-up valve dispenses measured amount of vegetable or coconut
oil liquid soaps, synthetic detergents, and antiseptic solutions. Sight
gauge indicates refill time. Locked filler top opens with special key
provided. Requires less than 5 lbs. of force to dispense soap.
Bradley liquid soap valves operate best with any vegetable oil or
coconut oil hand soap having a 10−15% soap concentration.
Installation
Verify all rough-in dimensions prior to installation. Secure separate
mounting bracket to wall. Slide dispenser into place and secure
locking screw through filler hole.
Guide Specification
Surface-mounted liquid soap dispenser shall be fabricated of 20
gauge satin finish stainless steel. Dispenser shall have completely
concealed mounting, vandal-resistant filler hole cover and sight
gauge. Push-up corrosion-resistant liquid soap valve. Requires less
than 5 lbs. of force to dispense soap.
Overall dimensions: 4
13
⁄16"W x 8
3
⁄16"H x 2
7
⁄8"D.
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.