Specification Sheet

6563
Soap Dispenser
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 10/22/2012
This information is subject to change without notice.
Bradley_SoapDispenser_6563
Tank Type Vertical Bradex
®
Surface-Mounted
ADA Compliant
Product Materials
BODY: 20 gauge stainless steel with exposed surfaces in architectural satin
finish.
BACK: 20 gauge stainless steel; heliarc welded to the body.
WALL PLATE: stainless steel.
SOAP VALVE: black ABS plastic mechanism.
Capacity
40-oz. liquid soap.
Operation
Push-in valve dispenses measured amount of vegetable or coconut oil liquid
soaps, synthetic detergents, and antiseptic solutions with less than 5 lbs. of
force. Sight gauge indicates refill time. Locked filler top opens with special
key provided.
Bradley liquid soap valves operate best with any vegetable oil or coconut oil
hand soap having a 10−15% soap concentration.
Installation
Verify all rough-in dimensions prior to installation. Secure separate mounting
bracket to wall. Slide dispenser into place and secure locking screw through
filler hole.
Guide Specification
Surface-mounted liquid soap dispenser shall be fabricated of 20 gauge satin
finish stainless steel. Dispenser shall have completely concealed mounting,
vandal-resistant filler hole cover and sight gauge. Push-in corrosion-resistant
liquid soap valve. Capacity: 40-oz. liquid soap. Requires less than 5 lbs. of
force to dispense soap.
Overall dimensions: 4
13
⁄16"W x 8
3
⁄16"H x 2
7
⁄8"D.
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.