Specification Sheet

657
Soap Dispenser
© 2017 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 1 8/10/2017
This information is subject to change without notice.
Bradley_SoapDispenser_657
Urn Liquid Soap Dispenser
Surface-Mounted
Product Materials
CONTAINER: high polish chrome-plated brass. Filler hole cover secured to
unit with chain.
SOAP CONTAINER: plastic.
SOAP VALVE: piston assembly of chrome-plated plastic. Rear valve assembly
of Delrin with Neoprene seal.
WALL PLATE: full-length heavy gauge stainless steel.
Capacity
12-oz. liquid soap.
Operation
Pump-type valve dispenses a measured amount of liquid soap with each stroke.
Viewing slots in case reveal soap level. Filler hole cover, with locking chain,
requires special wrench to open.
Bradley liquid and lather soap valves operate best with any vegetable oil or
coconut oil hand soap having a 10−15% soap concentration.
Installation
Verify all rough-in dimensions prior to installation. Secure separate mounting
bracket to wall. Attach soap dispenser.
Guide Specification
Surface-mounted soap dispenser shall have pump type valve with ½" diameter
chrome-plated plastic piston assembly in chrome plated hous ing. Soap level in
plastic container shall be visible through viewing slots in chrome plated brass
case. Dispenser shall have completely concealed mounting and vandal-proof
filler hole cap. Capacity: 12-oz. liquid soap.
Overall dimensions: 3
3
⁄16"W x 6"H x 5
7
⁄8"D.
6"
(152mm)
5
7
⁄8"
(149mm)
Ø 3
3
⁄16"
(81mm)
¾"
(19mm)
5
9
⁄32"
(134 mm)
1
3
⁄16"
(30mm)
4 holes
(Ø .213") (5.4 mm)
countersunk for
#10 flat head screw
6
3
⁄8"
(162mm)
Service Parts Available
Part Number Description
P15-332 Wrench (Key)