Specification Sheet

ManualsBrandsBradley ManualsSoap DispensersBradley Wall Mounted Soap Dispenser and 17-5/16" Shelf with 80 oz Capacity and Double Soap Valves

661, 661-73, 662, 662-73

Soap Dispensers

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Page 1 of 2 8/27/2018

This information is subject to change without notice.

Bradley_SoapDispenser_661_661-73_662_662-73

Model 661 – One Valve (Liquid Soap)

Model 662 – Two Valves (Liquid Soap)

Model 661-73 – One Valve (Foam Soap)

Model 662-73 – Two Valves (Foam Soap)

Shelf-Type Dispenser

Surface-Mounted

ADA Compliant

Product Materials

Hinged Shelf: 20 gauge stainless steel with exposed surfaces in architectural satin

finish.

Reservoir: 20 gauge stainless steel with exposed surfaces in architectural satin

finish. Welded seams.

Liquid Soap Valve: chrome-plated brass housing with ABS plastic mechanism.

Requires less than 5 lbs. of force to dispense soap.

Foam Soap Valve: chrome-plated ABS mechanism. Requires less than 5 lbs. of

force to dispense soap.

Capacity

80-oz. liquid or bulk foam soap

Operation

Pump-type valve draws soap from bottom of reservoir. Dispenses measured amount

of soap with each stroke. Sight gauge indicates refill time. Hinged shelf secured by

concealed friction latch. Requires less than 5 lbs. of force to dispense soap.

Bradley liquid soap valves operate best with any vegetable oil or coconut oil hand

soap having a 10−15% soap concentration.

Bradley foam soap valves work with majority of bulk foam soap.

Installation

Verify all rough-in dimensions prior to installation. Secure dispenser with mounting

screws (included). If mounted under a horizontal projection, allow 5" clearance for

filling.

Guide Specification

Shelf-type soap dispenser shall be fabricated of 20 gauge stainless steel. Liquid

soap valve has chrome-plated brass housing with ABS plastic mechanism. Foam

soap valve has a chrome-plated ABS mechanism. Concealed friction latch for cover.

Requires less than 5 lbs. of force to dispense soap. Capacity: 80-oz. liquid or bulk

foam soap.

Overall dimensions: 17-5/16"W x 3-5/16"H x 5"D

MODEL 662

MODEL 661

ADA Compliant

Consult local and national accessibility codes for proper

installation guidelines.

Conformity and compliance to local and national codes is

the responsibility of the installer.

Service Kits

Liquid Soap Valve - P15-408

Foam Soap Valve - P15-510

Summary of content (2 pages)

PAGE 1
661, 661-73, 662, 662-73 Soap Dispensers     Model 661 – One Valve (Liquid Soap) Model 662 – Two Valves (Liquid Soap) Model 661-73 – One Valve (Foam Soap) Model 662-73 – Two Valves (Foam Soap) Shelf-Type Dispenser Surface-Mounted ADA Compliant Product Materials inged Shelf: 20 gauge stainless steel with exposed surfaces in architectural satin H finish. Reservoir: 20 gauge stainless steel with exposed surfaces in architectural satin finish. Welded seams.
PAGE 2
661, 661-73, 662, 662-73 Soap Dispensers Dimensions (Model 661 shown) 5" (127mm) 17-5/16" (440mm) Dim. "A" to finished floor 3-5/16" (84mm) 1-9/16" (40mm) Typ. 13/16" (15mm) Typ. Dim. "A" Key Surface: Push button top to finished floor For Dim.