Specification
6A00-11
Liquid Soap / Liquid Sanitizer / Gel Sanitizer Dispenser
© 2020 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Page 1 of 2 11/11/2020
This information is subject to change without notice.
Bradley_SoapDispenser_6A00
Orders composed of products indicated as Bradex
®
will be
available to ship in three days after receipt of order at the factory.
There is no pricing penalty for this service from Bradley.
View Latest Version
Diplomat Series
Product Materials
BODY: Heavy gauge stainless steel with exposed surfaces in architectural
satin finish. Front has matching curvature to other Bradley Diplomat washroom
accessories.
WALL PLATE: ABS plastic.
RESERVOIR: reusable, cap-sealed plastic tank, holds 27 oz.
BATTERY BOX: Plastic, holds (3), "C" Alkaline batteries, not included.
INDICATOR LIGHTS: Green light = In "use" and dispensing.
Red flashing light = Low battery.
Capacity
27 oz (800 ml) of usable liquid soap, liquid hand sanitizer*, gel hand sanitizer,
and/or iodine only. No pumice or abrasive solutions.
*Liquid hand sanitizer must be 70–95% ethanol solution
Operation
Place hands under spout and hold to dispense liquid (2"-3" sensing range). Sight
gauge indicates refill time. Refill by unlocking lock with special key (supplied),
swinging open dispenser body. Remove cap to refill internal tank.
Installation
Verify all rough-in dimensions prior to installation. Secure separate mounting
bracket with mounting screws (included) at holes provided. Unlock the cover. Open
and remove tank and peristaltic tube. Secure unit to wall by installing the mounting
screws. Install batteries (not included). Fill and replace the tank and peristaltic tube.
Close and lock the cover.
Guide Specification
Soap/Sanitizer Dispenser: Bradley Corp. Diplomat Series Model 6A00: Surface-
mounted automatic soap/sanitizer dispenser, with face formed with contemporary
contours, radii, and finish matching related accessories in manufacturer's designer
series. Capacity is 27 oz (800 ml). Viscosity of soap or sanitizer must be between
1 cps–3,000 cps (centipoise). Dispenser accommodates liquid soap, liquid hand
sanitizer, and/or gel santifizer. If liquid hand sanitizer is used, the sanitizer will be
dispensed in a pooled form (not spray or mist). Equipped with hinged cover and
completely concealed mounting plate. Vandal resistant filler hole cover and sight
gauge. Corrosion-resistant liquid soap/gel sanitizer valve; peristaltic tube with self
contained valve/nozzle.
Overall dimensions: 4⁵⁄₈"W x 10⁹⁄₁₆"H x 4³⁄₁₆"D.
For information on Warranties, Maintenance, and BAA/ARRA
Compliance, visit our web site at:
bradleycorp.com/products/accessories/.
MasterFormat Title: Commercial Toilet Accessories
MasterFormat Number: 10 28 13.13
OmniClass Title: Toilet and Bath Specialties
OmniClass Code: 23.31.25.00
Finishes
Brushed Stainless
Product Compliance
ADA / ICC ANSI A117.1, Citation 309.3
Model
6A00-11
Surface-Mounted Automatic Soap/Sanitizer Dispenser
Compatible Bradley Products
6A20-110000 Hand Sanitizer/Soap Dispenser Stand
Model 6A00-11—Surface-Mounted Liquid
Tank Type Vertical Bradex
®