Specification Sheet

ManualsBrandsBradley ManualsSoap DispensersBradley Bradex Sensor Operated Wall Mounted Electronic Soap Dispenser

6A01

Soap Dispenser

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex

will be available to ship in three days after receipt of

order at the factory. There is no pricing penalty for

this service from Bradley.

Page 1 of 2 4/8/2014

This information is subject to change without notice.

Bradley_SoapDispenser_6A01

Diplomat Series

Product Materials

BODY: Heavy gauge stainless steel with exposed surfaces in architectural

satin finish. Front has matching curvature to other Bradley Diplomat washroom

accessories.

WALL PLATE: ABS plastic.

RESERVOIR: reusable plastic, holds 27 oz.

BATTERY BOX: Plastic, holds (4), "AA" Alkaline batteries, not included.

Capacity

27 oz.(800 ml) of bulk foam soap

Operation

Place hands under soap spout and hold to dispense liquid. (2"-3" sensing

range.) Sight gauge indicates refill time. Reﬁll by unlocking lock with special key

(supplied), swinging open dispenser body. Remove cap to reﬁll internal soap tank.

Installation

Verify all rough-in dimensions prior to installation. Secure separate mounting

bracket with mounting screws (included) at holes provided. Unlock the cover. Open

and remove tank. Secure unit to wall by installing the mounting screws. Install

batteries (not included). Fill tank with premixed, bulk foam soap. Close and lock the

cover.

Guide Specification

Soap Dispenser: Bradley Corp. Diplomat Series Model 6A01: Surface-mounted

automatic soap dispenser, with face formed with contemporary contours, radii, and

finish matching related accessories in manufacturer's designer series. Capacity 27

oz (800 ml). Equipped with hinged cover and completely concealed mounting plate.

Vandal resistant filler hole cover and sight gauge. Corrosion-resistant foam soap

valve.

Overall dimensions: 4⁵⁄₈"W x 10⁹⁄₁₆"H x 4³⁄₁₆"D.

Model 6A01-11—Surface-Mounted

Foam Tank Type Vertical Bradex

For information on Warranties, Maintenance and BAA/ARRA

Compliance, visit our web site at:

bradleycorp.com/products/accessories/.

ADA Compliant

Consult local and national accessibility codes for proper installation

guidelines.

Conformity and compliance to local and national codes is the

responsibility of the installer.

MasterFormat Title: Commercial Toilet Accessories

MasterFormat Number: 10 28 13.13

OmniClass Title: Soap Holders, Dispensers

OmniClass Code: 23.40.20.21.34

Summary of content (2 pages)

PAGE 1
6A01 Soap Dispenser  Model 6A01-11—Surface-Mounted Foam Tank Type Vertical Bradex® Diplomat Series Product Materials ODY: Heavy gauge stainless steel with exposed surfaces in architectural B satin finish. Front has matching curvature to other Bradley Diplomat washroom accessories. WALL PLATE: ABS plastic. RESERVOIR: reusable plastic, holds 27 oz. BATTERY BOX: Plastic, holds (4), "AA" Alkaline batteries, not included. Capacity 27 oz.
PAGE 2
6A01 Soap Dispenser Dimensions 43⁄16" (106mm) 45⁄8" (117 mm) 109⁄16" (268 mm) Dim. "A" to finished floor Dim. "A" Key Surface: Bottom of dispensing tube to finished floor Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley. Page 2 of 2 4/8/2014 This information is subject to change without notice. Bradley_SoapDispenser_6A01 For Dim.