Specification

6A20-110000
Hand Sanitizer/Soap Dispenser Stand
© 2020 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Verify all rough-in dimensions prior to installation.
Consult local and national codes. Conformity and compliance to
local and national codes is the responsibility of the installer.
Page 1 of 2 9/1/2020
This information is subject to change without notice.
Bradley_HandSanitizer_SoapDispenser_Stand
Finishes
Brushed Stainless
Product Compliance
ADA / ICC ANSI A117.1, Citation 309.3
Compatible Bradley Products
Product Page
• 6A00-110000 Liquid Soap/Sanitizer Dispenser
• 6A01-110000 Foam Soap/Sanitizer Dispenser
• 6A02-110000 Liquid Sanitizer Dispenser
Technical Data
• 6A00-110000 Liquid Soap/Sanitizer Dispenser
• 6A01-110000 Foam Soap/Sanitizer Dispenser
• 6A02-110000 Liquid Sanitizer Dispenser
Stand Key Features
• ADA compliant
• Seamless integration with Bradley's touchless 6A Series (liquid & foam)
Diplomat Soap/Sanitizer Dispensers
• Universal mounting plate compatible with soap/sanitizer units by others*
†
• Angled drip tray to eliminate excess dripping on the oor
• Rubber feet on the base of the unit to prevent scratching and sliding
• Rened, rounded-corner design to provide a safer experience
• No visible fasteners on front of the unit when assembly is complete
• Type 304 stainless steel
• Easy installation, minimal assembly required
Specification
Mounting plate is compatible with Bradley's 6A00-11, 6A01-11, and
6A02-11 Diplomat Series Soap/Sanitizer dispensers. Designed with
rounded edges. Matches form and nish of related accessories. Unit
is free standing and can be easily moved throughout a facility while
maintaining an upright and stable position. Unit is composed of type 304
stainless steel. Designed to include a non-sharp, angled drip tray with
curved edges. Dispenser is supplied separately. Once assembled, the
dispensing height will meet ADA standards for max mounting height.
Overall Dimensions
• Height: 56½" (1,436 mm)
• Width: 15¼" (387 mm)
• Depth: 15¼" (387 mm)
Operation
Hand sanitizer dispenser stand is free standing allowing for ease of mobility
and custom placement throughout any facility. Dispenser is secured to
the stand mounting plate using the supplied hardware. When used with
Bradley's 6A Series Soap/Sanitizer dispensers, stand will help provide a
hands-free experience wherever sanitizing is needed.
Mounting
Secure mounting hardware (included) for mounting of Bradley 6A series
dispensers (sold separately). For dispensers by others (sold separately),
hardware/mounting tape is not included.
Model
6A20-110000 Hand Sanitizer/Soap Dispenser Stand
* Field drilling of holes, alternate hardware, and/or mounting tape may be necessary
(not included)
† Proper operation of a dispenser from others cannot be guaranteed when used with
this stand. Refer to the dispenser technical information to ensure proper function
can be achieved.
Shown with 6A dispenser
(not included)
Stand only