Specification Sheet

7815
Channel-Frame Mirror/Shelf
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 12/19/2012
This information is subject to change without notice.
Bradley_Mirror_7815
Mirror with roll-formed channel frame and theft-resistant mounting:
 Model 7815-XXXX (Specify width and height)
Model 7815-2436 is Bradex
®
Product Materials
FRAME: one-piece, roll-formed stainless steel with bright an nealed finish. Channel is ¾" x ¾" x
7
⁄16" with 90° mitered corners. Double strength continuous integral stiffener on all sides for added
strength.
BACK: galvanized steel.
MIRROR: first quality ¼" float glass, thermosetting infrared-cured paint backing with Poly-Glaze
protective finish. Manufactured in accordance with ASTM C 1036 and ASTM C 1503. All edges
protected by shock-absorbing, neoprene tubing. The back of the mirror is protected by a sheet of ¼"
extruded polystyrene, which is placed between the mirror and the galvanized steel.
SHELF: 18 gauge stainless steel with exposed surfaces in architectural satin finish. Flanged front
and side, welded to frame.
SHELF BRACKETS: 16 gauge stainless steel are provided on units exceeding 48" width.
Optional Features
Features Suffix

¼" tempered glass mirror in lieu of polished float glass mirror* -2

Laminate glass -3

Highly polished No. 8 architectural finish, 20 gauge stainless steel in lieu of
polished float glass mirror
-4

Bright annealed 20 gauge stainless steel in lieu of polished float glass mirror -5

Plexiglas
®
-6
* Either the Length (L) or the Width (W) must be greater than 25".
An inherent characteristic of a manufacturing process for tempered glass is distortion
which may vary from mirror to mirror.
Stainless steel mirrors will differ in optic quality from glass mirrors.
In larger sizes, stainless mirrors are subject to distortion and/or "oil canning" for
which Bradley Corporation cannot accept responsibility.
Bradley mirrors are not field interchangeable from horizontal to vertical or vice versa.
Always specify width first.
Installation
Verify all rough-in dimensions prior to installation. Secure con cealed mounting bracket to wall with
screws (not included) at holes provided. Mounting kits available through Bradley (ref. #899-026).
For more information, visit bradleycorp.com. Provide in-wall backing at mounting screw locations.
Position mirror over mounting bracket to engage hanger tabs. Slide mirror down and lock into
position.
Guide Specification
Mirror shall be framed with one-piece, roll-formed stain less steel with ¾"
face and neatly mitered corners. Double strength continuous integral stiffener
on all sides. Back of unit shall be galvanized steel. Separate mounting
brackets for concealed mounting. Integral 18 gauge stainless steel shelf shall
have front and side flanges with welded and polished corners. Mirror shall be
of first quality ¼" polished float glass, guaranteed for 15 years against silver
spoilage and protected by shock-absorb ing, neoprene tubing with Poly-Glaze
protective finish.
Framed Mirror shall be Bradley Model
7815-______" W x______" H (specify width and height).
Model 7815 series channel-frame mirrors can be fabricated to a maximum
size of 96"W x 60"H.
ADA Compliant
Consult local and national accessibility codes for proper installation
guidelines.
Conformity and compliance to local and national codes is the
responsibility of the installer.