Specification Sheet
9538, 9539
Shower Curtain Rod
© 2017 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 1 3/3/2017
This information is subject to change without notice.
Bradley_ShowerCurtainRod_9538_39
Concealed Mounting
Model 9538 – 1" O.D.
(36" Long) Bradex
®
(42" Long) Bradex
®
(48" Long) Bradex
®
(60" Long) Bradex
®
(72" Long) Bradex
®
Model 9539 – 1-1/4" O.D.
(36" Long) Bradex
®
(42" Long)
(48" Long) Bradex
®
(60" Long) Bradex
®
(72" Long)
For 72" lengths and greater, model 9522 Shower Rod
Ceiling Support is required! Must specify distance from
the ceiling!
Product Materials
FLANGES: glass polypropylene, 3
1
⁄8" dia. Shower rod support sleeves
formed with flange as one piece.
ESCUTCHEONS: 22 gauge stainless steel. One-piece drawn con struction
with exposed surfaces in architectural satin finish. Snap over flanges to
conceal mounting screws.
TUBING: 18 gauge stainless steel, seamless con struc tion with exposed
surfaces in architectural satin finish.
Installation
Verify all rough-in dimensions prior to installation. To properly engage rod
in support sleeves, rod length must be no less than ap prox i mate ly ¼" shorter
than wall opening. Secure one flange to wall with mounting screws (included)
at holes provided. Align mounting holes vertically. Slip opposite flange and
both escutcheons into place. Secure flange to wall and snap escutcheons over
mounting flanges.
Optional Features
Feature Suffix
Bright polished finish
-4
Guide Specification
Concealed mounted shower rod shall be fab ri cat ed of 18 gauge stainless steel
of seamless construction. Mounting flanges shall be of glass polypro py lene
with snap-on vandal-resistant protective es cutch eons.
FLANGE (CON CEALED)
(2) - ¼ x 2½"
HEX HD. LAG BOLT
ESCUTCHEON
(SNAP ON TYPE)
SHOWER ROD
WALL
“L”