Installation manual
SS-2N/AST/STD, SS-2N/AST/WH  Installation
14  10/24/11  Bradley Corporation • 215-1498 Rev. F; ECM 11-08-011
Cleaning and Maintenance for Terreon
®
Material Description: TerreonisanNAHB-certieddensiedsolidsurfacematerialcomposedofpolyesterresinandisresistantto
chemicals,stains,burnsandimpact.Surfacedamagecanbeeasilyrepairedwitheverydaycleansersornegritabrasives.
Routine Cleaning: Clean daily or as often as conditions require using a standard commercial or household cleaner such as 
Formula409
®
 or Windex
®
.
Stubborn Stains:  Remove tough stains with Ajax
®
, Comet
®
, or Soft-Scrub
®
 and a green Scotch-Brite
®
 pad or lightly sand in a 
circularmotionwith240gritwet/drysandpaper.ThenishcanberenewedwithamaroonScotch-Britepad.
Special Situations for Terreon Material
Scratches:RemovescratcheswithagreenScotch-Britepad.ThenishcanthenberenewedwithamaroonScotch-Brite
pad, followed by a white Scotch-Brite pad or 30-micron sandpaper.
Hard Water Deposits: Remove hard water deposits with a mild solution of vinegar and water. Always rinse the unit thoroughly 
after cleaning.
Restoring the surface: UseHope’s
®
 Solid Surface cleaner and polish to refresh and protect the Terreon Solid Surface 
material.BradleyrecommendsadditionalcareandmaintenanceforthedarkercoloredTerreon.Forcompleteinstructionson
this additional maintenance, visit bradleycorp.com.
Do not use strong acid or alkaline chemicals and cleansers to clean Terreon. If these chemicals come in contact 
with the surface, wipe them off immediately and rinse with soapy water. Avoid contact with harsh chemicals such 
as paint remover, bleach, acetone, etc. Avoid contact with hot pans and objects.
Repair Kits:Terreonrepairkitsareavailable.ContactyourBradleyrepresentativeordistributorforpartnumbersandpricing.
Repairkitsaremadetoorderandhaveashelflifeof30days.
Terreon
®
 is a unique, cast solid surface material. Aggregate flow and distribution as well as shades of color can vary from 
product to product creating natural characteristics.
Brand Names
Use of brand names is intended only to indicate a type of cleaner. This does not constitute an endorsement, nor does the omission 
of any brand name cleaner imply inadequacy. Many products named are regional in distribution, and can be found in local 
supermarkets,departmentandhardwarestores,orthroughyourcleaningservice.Itisemphasizedthatallproductsshouldbeused
instrictaccordancewithpackageinstructions.
Stop Valve Troubleshooting
Problem Cause Solution
Water dribbles or 
does not flow from the 
sprayhead.
Stop Valves may 
not be functioning 
properly.
1.  Close the stops and inspect the valves that supply water to the lavatory 
system.
2. Inspect the stop valves to see that they have been properly installed.
Sprayhead delivers 
ONLYhotORcoldwater.
Stop Valves may 
not be functioning 
properly.
1.  Close the stops and inspect the valves that supply water to the lavatory 
system.
2. Inspect the stop valves to see that they have been properly installed.
3. Inspect the thermostatic mixing valve for proper installation and 
connection to hot and cold supplies.










