Installation manual

Installation SS-2N/AST/STD, SS-2N/AST/WH
Bradley Corporation • 215-1498 Rev. F; ECM 11-08-011 10/24/11 9
6
Optional Electric Tankless Water Heater
5
Install the Drain
240/208 or 277 voltage is required for hot water heater.
Refer to the installation manual provided with the hot
water heater for further installation information.
Connect the ½" flexible
hose from the cold water
supply stub-out to the hot
water heater inlet.
B
Connect the ½" flexible hose
from the hot water heater
outlet to the supply inlet on
the solenoid valve assembly.
C
Hang the water heater
on the right side frame
member.
A
To Drain
Stub-Out