Specification Sheet

S19-921H
On-Site
®
Gravity-Fed Eyewash
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 2 1/12/2012
This information is subject to change without notice.
Bradley_Eyewash_S19-921H
• Complies with American National Standard Z358.1‑2009
• Includes Wall‑Mounting Bracket, Universal Identification Sign and
Inspection Tag
• Full, One‑Year Warranty — Water Preservative Not Included
Specifications
S19-921H: Self‑contained eyewash unit is ideal anywhere water supply is
not available. Flushes eyes for 15 minutes at a minimum of 0.4 gallons/minute
by using only 7 gallons of water. Transparent tank assembly lets you see at
a glance when it’s time to clean or refill the tank. Sturdy pedestal with hinged
eyewash tray pulls down in one quick motion. Removable tank is inverted onto
pedestal, piercing a liner. Stainless steel clamps hold tank to pedestal. When
arm is pulled down, water flow is activated.
Insulated heater jacket thermostatically controls water in weather conditions
down to ‑10ºF (‑23.33ºC). LED indicator lights ensure proper operation of
heaters. GREEN means power is ON. AMBER means heaters are in operation.
RED means unit has malfunctioned . This will automatically shut the unit off.
Pulling front strap down and away from unit activates eyewash. Uses standard
120VAC power cord.
On-Site Heated unit is not rated for outdoor use.
Construction
Refillable eyewash tank fills to 7 gallons. Weighs 60 lbs. filled and 3.5 lbs.
empty. Transparent tank made of impact resistant plastic, colored bright yellow
for high visibility in emergency situations. Pedestal supports the eyewash tank
and weighs 6 lbs. The yellow pedestal and black pull‑down arm are made of
impact and chemical resistant plastic. Wall bracket is stainless steel. Yellow
insulated jacket made of 200 Denier foam‑backed nylon oxford w/clear vinyl
pocket for indicator light box. Silicone rubber pad heaters have PSA adhesive
backing for ease of installation.
Standard Equipment
Tank
12"H x 22"W x 9"D tank made of transparent yellow polycarbonate.
Pedestal
13½"H x 22"W x 18½"D pedestal made of opaque yellow polypropylene, with a
black polypropylene pull‑down arm.
Wall Bracket
Stainless steel mounting bracket.
Waste
Nipple for ½" I.D. tube.
Jacket
High‑visibility yellow, waterproof insulated jacket made of 200 Denier foam‑
backed nylon w/clear vinyl pocket. Includes 9' cord.
Heaters
121‑watt tank heater and 60‑watt tube heater made of silicone rubber with PSA
adhesive backing.
Dual Thermostat
75°F +/‑ 5° normal operation thermostat in series with overheat protection
of 90°F +/‑ 5° high limit, manually reset thermostat.
Indicator Lights
Green, Amber and Red LED indicator.