Specification Sheet

S19-120FM
Flush-Mounted Drench Shower
© 2018 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 1 of 2 10/22/2018
This information is subject to change without notice.
Bradley_DrenchShower_S19-120FM
• Exceeds American National Standard Z358.1 Specifications
• Galvanized Steel Protected with BradTect
®
Safety Yellow Coating
• Flush-Mounted with Concealed Pipe and Fittings
• Universal Identification Sign and Inspection Tag Included
• Full, One-Year Warranty
• SpinTec
™
showerheads are covered by one or more of the following patents: 8113446;
D594,089; D669,555; Reg. Comm. Des. D001079560-0001. Other patents pending.
• Classified by Underwriters Laboratory Inc. to ANSI Z358.1
Specifications
Integral flange mounts flush with finished ceiling. Showerhead is plastic, shroud is
painted white steel, and the pull rod is stainless steel. Galvanized steel piping is
additionally protected with BradTect
®
safety yellow coating. Shower provides a superior
washdown with a more even spray pattern.
Drench shower is designed to accommodate standard 8' ceiling height.
ANSI Z358.1 compliant drench showers are mounted between 82"–96"
from the lower edge of the showerhead or shroud to the floor.
This plumbing fixture is not intended to dispense water for human
consumption through drinking or for preparation of food or beverages.
®
Model Description
 S19-120FM Flush-Mounted Drench Shower w/ Horizontal Supply
 S19-2150 Navigator EFX20 - Emergency Thermostatic Mixing Valve
Tepid Water Options
Navigator S19-2150 EFX20
Emergency Themostatic Mixing Valve
Keltech SNA-Series
Tankless Water Heater
Satisfies ANSI/ISEA Z358.1 tepid water requirements.