Specification

ManualsBrandsBradley ManualsTools & HardwareFaucet Mount Eyewash

S19-200B

Faucet-Mount Eyewash

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Page 1 of 2 9/17/2015

This information is subject to change without notice.

Bradley_Eyewash_S19-200B

• Laboratory Application

• Complies with American National Standard Z358.1

• Universal Mount for Both Standard and Gooseneck Faucets (faucets not included)

• Includes Universal Identiﬁcation Sign and Inspection Tag

• Full One-Year Warranty

• Classiﬁed by Underwriters Laboratory Inc. to ANSI Z358.1

• Lead Free design*

* Wetted surface contains less than .25% lead

Speciﬁcations

Low-cost eyewash mounts easily to both standard and gooseneck faucets. For eyewash

use, leave cold water supply on at all times. To operate unit pull diverter pin toward

user. For faucet use, water ﬂow is activated by the use of the shutoff pin. Push the pin

to the opposite side for water ﬂow.

To eliminate the risk of scalding eyes during use, it is recommended that hot

water supply to the faucet be disconnected or that tempered water be provided.

Standard Equipment

Standard Sprayhead Assembly

Chrome-plated brass sprayhead assembly with twin soft-ﬂow eyewash heads and

highly visible yellow plastic protective covers. Safe, steady water ﬂow under varying

water supply conditions from 30–90 PSI is assured by integral ﬂow control in the

sprayhead assembly.

Adapter

Chrome-plated brass adapter with aerated ﬂow replaces faucet aerator; provides for

eyewash mounting to faucet. Standard thread on ﬁxtures ﬁts standard or gooseneck

faucets with

⁄64

" x 27 thread (male). Unit is also provided with two adapters to convert

the standard thread to ﬁt faucets with

⁄16

" x 27 thread (female) and

⁄16

" x 27 thread

(female).

Other adapter options available at an additional cost through Bradley Fixtures

Corp. See model listing below or call Bradley for details.

To determine the

faucet's thread size, please contact the faucet manufacturer.

For additional adapter information, please review the product's installation

instructions.

Diverter

Chrome-plated brass diverter attaches to adapter. Provides for one-step activation

which complies with ANSI Standard Z358.1 when installed and used properly.

Recommended Option:

Navigator S19-2000 EFX8

Emergency Thermostatic Mixing

Valve

Satisfies ANSI Z358.1

tepid water requirements.

Model Description

 S19-200B Faucet-Mount Eyewash

 S19-2000 Navigator EFX8 - Emergency Thermostatic Mixing Valve

Optional Adapters Available for Purchase

 153-395 Female, ¹³⁄₁₆" x 24 - Chrome

 153-396 Male, ³⁄₈" NPSM - Chrome

 153-401 Female, ¾" (Garden Hose) - Chrome

 153-440 Female, ¾" x 27 - Chrome

Summary of content (2 pages)

PAGE 1
S19-200B Faucet-Mount Eyewash • • • • • • • Laboratory Application Complies with American National Standard Z358.1 Universal Mount for Both Standard and Gooseneck Faucets (faucets not included) Includes Universal Identification Sign and Inspection Tag Full One-Year Warranty Classified by Underwriters Laboratory Inc. to ANSI Z358.1 Lead Free design* ® * Wetted surface contains less than .25% lead Specifications Low-cost eyewash mounts easily to both standard and gooseneck faucets.
PAGE 2
S19-200B Faucet-Mount Eyewash 55⁄8" (143mm) 55 ⁄64"-27 thread – female (adapters available to fit most faucets) 70° 35⁄16" (85mm) 5¼" (133mm) Page 2 of 2 9/17/2015 This information is subject to change without notice. Bradley_Eyewash_S19-200B © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.