Replacement Part List

ManualsBrandsBradley ManualsTools & HardwareOn-Site Portable Gravity-Fed Eyewash

Emergency Fixtures

Replacement Parts

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Page 1 of 8 12/4/2018

This information is subject to change without notice.

Bradley_SafetyReplacementParts

Classic Model Parts

Eyewash Bowls

 154-058

Impact-resistant

plastic eyewash

bowl, 10" diameter

 187-053

Corrosion-resistant

stainless steel bowl,

10¾" diameter

Dust Caps

 107-371

Eyewash dust caps only (sold

individually; two required per

eyewash). Yellow plastic tether.

Approximately 1" x 1".

 S53-063

Dual Eye/Face wash dust

caps only (sold individually;

two required per eyewash).

Beaded chain tether, 2¼" x 1".

 S53-310

Eyewash dust cap (sold

individually; two required

per eyewash). Beaded

chain tether, 1" x 1".

Sprayhead and Spray Ring Assemblies

 S45-2453

Eye/face wash (sprayheads

only) Includes 2.4 GPM ﬂow

control inside each head. Total

ﬂow from dual heads is 4.8

gpm

 S39-394

Eyewash sprayhead assembly

with supply stem

 S39-396

Eye/face wash sprayhead

assembly with supply stem

 S39-397

Eyewash and spray ring

assembly with supply stem

 S39-681

Eye/face wash sprayhead assembly;

stem not included

 S39-682 (not shown)

Eye/face wash sprayhead assembly

for use with PVC unit only. Stem not

included

 S05-127

Spray ring only; requires

cross-connection yoke for

attachment to eyewash

Summary of content (8 pages)

PAGE 1
Emergency Fixtures Replacement Parts Classic Model Parts Eyewash Bowls  154-058 Impact-resistant plastic eyewash bowl, 10" diameter Dust Caps  187-053 Corrosion-resistant stainless steel bowl, 10¾" diameter  107-371  S53-063 Eyewash dust caps only (sold individually; two required per eyewash). Yellow plastic tether. Approximately 1" x 1".  S53-310 Dual Eye/Face wash dust caps only (sold individually; two required per eyewash). Beaded chain tether, 2¼" x 1".
PAGE 2
Emergency Fixtures Replacement Parts Classic Model Parts Eyewash Ball Valves, Handles and Hardware  S45-122 Plastic eyewash handle with ½" brass NPT stay-open ball valve and hardware  S45-123 Plastic eyewash handle with hardware  128-135 Plastic eyewash handle only  S27-282 Brass ½" NPT stayopen ball valve only  S30-112 Stainless steel eyewash handle with dust cover with ½" stainless steel NPT stay-open ball valve  S30-070 Stainless steel eyewash handle with ½" brass NPT stay-open ball valve
PAGE 3
Emergency Fixtures Replacement Parts Classic Model Parts Stem Assemblies, Spacers and Flow Restrictors Sprayhead Assembly Galvanized Fixture with Plastic Bowl Galvanized Fixture with Stainless Steel Bowl Standard Stainless Steel Fixture 316 Stainless Steel Fixture Eyewash Only S21-071 (stem) 113-1185 (stem spacer) S21-071 (stem) 113-1159 (stem spacer) S21-072 (stem) 113-1159 (stem spacer) S21-075 (stem) 113-1159 (stem spacer) Eye/Face Wash with Spray Ring S21-073 (stem) 113-1185 (stem spacer) S
PAGE 4
Emergency Fixtures Replacement Parts Halo Model Parts Covers and Bowl Kits  187-320 Plastic bowl  S90-390  S90-391 Plastic bowl cover kit  S90-388 Stainless steel bowl kit  S90-392 Stainless steel bowl cover kit 316 stainless steel bowl kit Sprayhead Assemblies  S05-190 Sprayhead assembly Dust Cover Kits  S05-192  S05-204 Sprayhead assembly  S45-2675 304 Stainless steel sprayhead assembly  S45-2676 Eyewash cover kit Eye/Face wash cover kit  S05-205 316 Stainless steel spra
PAGE 5
Emergency Fixtures Replacement Parts Spintec™ Showerhead and Drench Shower Parts • Includes integral 22gpm flow restrictor • Fully distributes water throughout spray pattern • Compact design minimizes footprint in your facility  S24-192 Plastic shroud and ring (showerhead not included)  S24-193 IStainless steel shroud and ring (showerhead not included)  S24-194  S24-200 Plastic showerhead and 1" diameter 90° elbow Stainless steel showerhead and 1" diameter 90° elbow  154-147 Ring only  S24-
PAGE 6
Emergency Fixtures Replacement Parts Drench Hose Parts Hoses Hose Guide Bracket  S89-002  140-226 8' thermoplastic hose; yellow  269-053  269-054 12' thermoplastic hose; yellow  S89-003 6' stainless steel hose 25' thermoplastic hose; yellow Drench hose guide bracket Drench Hose Replacement Part Valves  S39-817 Replacement valve with drench hose sprayhead Backflow Prevention  S27-303 Dual-check backflow preventer compliant with ASSE 1024 & CSA B64.
PAGE 7
Emergency Fixtures Replacement Parts Other Safety Signs and Tags  114-050  114-051 Drench shower sign  114-052 Eyewash sign  114-050E Combination drench shower and eyewash sign  114-051E International safety drench shower sign International safety eyewash sign  114-052E International safety combination drench shower and eyewash sign Foot Treadle Kits  S45-572 Foot treadle and hardware kit (with 3-foot chain) for standard pedestal-mounted eyewashes and combination shower/eyewash units
PAGE 8
Emergency Fixtures Replacement Parts Other Freeze and Scald Protection Kits • Freeze protection valves completely open at 35°F (1.6°C) and closes at 45°F (7.2°C) • Scald protection valves completely open at 105°F (40.5°C) and closes at 85°F (29.4°C) Classic combination units require both drench shower and eyewash protection valves.