Installation Guide

Installation S53-315
3Bradley Corporation • 215-1582 Rev. G; EN 10-02-011 7/6/2010
Attach Faucet and Trim Plate to the Deck
1
SINK/COUNTER TOP
TRIM PLATE STUDS
A
DRILL TWO 3/8'' (9.5mm)
DIA. HOLES. DRILL 1''
(25mm) DIA. HOLE.
B
ATTACH TRIM PLATE STUDS
AND SECURE TRIM PLATE TO
SINK USING METAL
WASHERS AND HEX NUTS.
Optional Trim Plate Removal
White Plastic Screw Spacers
Gasket and Faucet Spacers
Trim Plate
Long Trim Plate Screws
A
Remove and discard Long
Trim Plate Screws and white
plastic screw spacers.
B
After removing Trim Plate, re-attach
gaskets and faucet spacer using
shorter M4 x 12MM screws (supplied).
Do not re-install screw spacers.
Short Trim Plate Screws